Electromen OY DC Motor Controller, 12/36 V dc, 3 Phase, 10 A, Potentiometer Function

Subtotal (1 unit)*

₩265,343.20

Add to Basket
수량 선택 또는 입력
재고있음
  • 4 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩265,343.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
773-6832
제조사 부품 번호:
EM-206
제조업체:
Electromen OY
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Electromen OY

Number of Phases

3

Product Type

DC Motor Controller

Control Function

Potentiometer

Output Voltage

12/24 V

Supply Voltage

12/36 V dc

Current Rating

10 A

Overall Length

43mm

Overall Width

73mm

Overall Depth

30 mm

Standards/Approvals

No

COO (Country of Origin):
FI

Electromen - EM-206 BLDC MOTOR CONTROLLER 12-36 V DC, 10A


The EM-206 is a DC-motor controller designed for brushless motors with hall sensor feedback (60º or 120º commutation).High efficiency is achieved by using a MOSFET power stage and RF emissions are very low.

The unit is allows control of speed, direction and braking, speed control is set using external inputs or the on board trim pots

There are open and closed loop control modes - open loop (direct control) sets the motor voltage proportional to the control voltage and closed loop mode uses hall sensor feedback for more accurate speed control

Current limit restricts motor torque when motor current exceeds the set value, this can be adjusted with trim pot or with an external signal

Fault output indicates current limit, under voltage and sensor faults

The optional EM-A1 expansion card can be installed to provide symmetrical control with the an external ±10V signal

Features and Benefits


Three phase output

Highly efficient with very low EMC emissions

Continuous speed adjustment

Reversing and braking control

Symmetrical control (rev-stop-fwd) option ±10V

Fault output

Open/closed loop modes

DIN rail mountable;12-36Vdc, 10A continuous, 15A peak

Open & closed loop control operation with hall sensor feedback

Speed, direction, current limiting, soft start/stop and braking control

Compact and DIN rail mountable

Symmetrical control (rev-stop-fwd) can be achieved with EM-A1 card option

EM-206 Brushless Motor Controller


EM-206 is a DC-motor controller that is designed for brushless motors with hall sensor feedback. The unit has a mosfet-type high efficiency power stage. The unit is equipped with standard controls, such as speed, stop, reversing and braking.

Three phase output

Continuous speed adjustment

Reversing

Braking

Hall sensor supply and input

60º or 120º commutation

Settable / controllable current limit

Fault output

Open or closed loop activity

High efficiency

Rail base mountable

DC Drives - Brushless

관련된 링크들