Allegro Microsystems Through Hole Hall Effect Sensor 3.8 V 24 V, Ultra Mini SIP, 3-Pin
- RS 제품 번호:
- 680-7488
- 제조사 부품 번호:
- A1104EUA-T
- 제조업체:
- Allegro Microsystems
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 pack of 5 units)*
₩8,892.40
재고있음
- 추가로 2025년 12월 29일 부터 460 개 단위 배송
- 추가로 2026년 1월 05일 부터 1,295 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 5 - 120 | ₩1,778.48 | ₩8,892.40 |
| 125 - 620 | ₩1,752.16 | ₩8,760.80 |
| 625 + | ₩1,440.08 | ₩7,200.40 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 680-7488
- 제조사 부품 번호:
- A1104EUA-T
- 제조업체:
- Allegro Microsystems
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Allegro Microsystems | |
| Sensor Type | Hall Effect Sensors | |
| Product Type | Hall Effect Sensor | |
| Technology | BiCMOS | |
| Mount Type | Through Hole | |
| Magnetic Type | Unipolar | |
| Minimum Supply Voltage | 3.8V | |
| Maximum Supply Voltage | 24V | |
| Package Type | Ultra Mini SIP | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Pin Count | 3 | |
| Standards/Approvals | No | |
| Width | 1.52 mm | |
| Length | 4.09mm | |
| Height | 3.02mm | |
| Series | A1104 | |
| Response Time | 4μs | |
| Supply Current | 7.5mA | |
| Automotive Standard | AEC-Q100 | |
| 모두 선택 | ||
|---|---|---|
브랜드 Allegro Microsystems | ||
Sensor Type Hall Effect Sensors | ||
Product Type Hall Effect Sensor | ||
Technology BiCMOS | ||
Mount Type Through Hole | ||
Magnetic Type Unipolar | ||
Minimum Supply Voltage 3.8V | ||
Maximum Supply Voltage 24V | ||
Package Type Ultra Mini SIP | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Pin Count 3 | ||
Standards/Approvals No | ||
Width 1.52 mm | ||
Length 4.09mm | ||
Height 3.02mm | ||
Series A1104 | ||
Response Time 4μs | ||
Supply Current 7.5mA | ||
Automotive Standard AEC-Q100 | ||
A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.
Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress.
The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor.
The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels.
Continuous-time operation with fast power-on time and low noise
Stable operation over full operating temperature range
Reverse battery protection
Solid-state reliability
Factory-programmed at end of line for optimum performance
Robust EMC performance
High ESD rating
Regulator stability without a bypass capacitor
Hall Effect Sensors, Allegro MicroSystems
관련된 링크들
- Allegro Microsystems Through Hole Hall Effect Sensor 3.8 V 24 V, Ultra Mini SIP, 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor 2.4 V 5.5 V, Ultra Mini SIP, 3-Pin
- Allegro Microsystems Through Hole Chopper Stabilised Precision Hall Effect Switch 3 V 24 V, SIP, 3-Pin
- Allegro Microsystems 1-Axis Through Hole Hall Effect Sensor 3.8 V 24 V, Ultra Mini SIP, 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor 3 V 24 V, SIP, 3-Pin
- Allegro Microsystems Surface Mount Hall Effect Sensor Switch, SOT-23, 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor 4.5 V 5.5 V, SIP, 3-Pin
- Allegro Microsystems 1-Axis Through Hole Hall Effect Sensor 4.5 V 5.5 V, SIP, 3-Pin