Name: Allegro Microsystems Surface Hall Effect Sensor 3.8 V 24V, SOT-23, 3-Pin
Brand: Allegro Microsystems
SKU: 680-7090P
Availability: OutOfStock

현재 비가용

RS는 이 제품을 더 이상 판매하지 않습니다.

생산용 포장 (RS 제품 번호에 P를 포함)

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Allegro Microsystems
	Product Type	Hall Effect Sensor
	Sensor Type	Hall Effect Sensors
	Technology	BiCMOS
	Mount Type	Surface
	Magnetic Type	Unipolar
	Minimum Supply Voltage	3.8V
	Package Type	SOT-23
	Maximum Supply Voltage	24V
	Minimum Operating Temperature	-40°C
	Pin Count	3
	Maximum Operating Temperature	85°C
	Width	1.91mm
	Standards/Approvals	No
	Height	950μm
	Length	2.98mm
	Series	A1101
	Automotive Standard	AEC-Q100
	Response Time	4μs
	Supply Current	7.5mA

	모두 선택
	브랜드 Allegro Microsystems
	Product Type Hall Effect Sensor
	Sensor Type Hall Effect Sensors
	Technology BiCMOS
	Mount Type Surface
	Magnetic Type Unipolar
	Minimum Supply Voltage 3.8V
	Package Type SOT-23
	Maximum Supply Voltage 24V
	Minimum Operating Temperature -40°C
	Pin Count 3
	Maximum Operating Temperature 85°C
	Width 1.91mm
	Standards/Approvals No
	Height 950μm
	Length 2.98mm
	Series A1101
	Automotive Standard AEC-Q100
	Response Time 4μs
	Supply Current 7.5mA

A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems

The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.

Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress.

The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor.

The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels.

Continuous-time operation with fast power-on time and low noise

Stable operation over full operating temperature range

Reverse battery protection

Solid-state reliability

Factory-programmed at end of line for optimum performance

Robust EMC performance

High ESD rating

Regulator stability without a bypass capacitor

Allegro Microsystems Surface Hall Effect Sensor 3.8 V 24V, SOT-23, 3-Pin

A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems

Hall Effect Sensors, Allegro MicroSystems

관련된 링크들