Broadcom Surface Hall Effect Sensor 4.5 V 8 V, SO-8, 8-Pin
- RS 제품 번호:
- 261-9697P
- 제조사 부품 번호:
- ACHS-7122-000E
- 제조업체:
- Broadcom
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal 10 units (supplied in a tube)*
₩37,976.00
재고있음
- 2,240 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 10 - 48 | ₩3,797.60 |
| 50 - 98 | ₩3,431.00 |
| 100 - 198 | ₩2,876.40 |
| 200 + | ₩2,632.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 261-9697P
- 제조사 부품 번호:
- ACHS-7122-000E
- 제조업체:
- Broadcom
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Broadcom | |
| Sensor Type | Hall Effect | |
| Product Type | Hall Effect Sensor | |
| Technology | Hall Effect | |
| Mount Type | Surface | |
| Magnetic Type | Hall | |
| Maximum Frequency Response | 80kHz | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 8V | |
| Package Type | SO-8 | |
| Sensitivity | 185mV/A | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 8 | |
| Maximum Operating Temperature | 110°C | |
| Series | ACHS-712x | |
| Height | 1.91mm | |
| Length | 8mm | |
| Standards/Approvals | UL 1577, CSA | |
| Width | 3.9 mm | |
| Response Time | 21μs | |
| Automotive Standard | No | |
| Supply Current | 13mA | |
| 모두 선택 | ||
|---|---|---|
브랜드 Broadcom | ||
Sensor Type Hall Effect | ||
Product Type Hall Effect Sensor | ||
Technology Hall Effect | ||
Mount Type Surface | ||
Magnetic Type Hall | ||
Maximum Frequency Response 80kHz | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 8V | ||
Package Type SO-8 | ||
Sensitivity 185mV/A | ||
Minimum Operating Temperature -40°C | ||
Pin Count 8 | ||
Maximum Operating Temperature 110°C | ||
Series ACHS-712x | ||
Height 1.91mm | ||
Length 8mm | ||
Standards/Approvals UL 1577, CSA | ||
Width 3.9 mm | ||
Response Time 21μs | ||
Automotive Standard No | ||
Supply Current 13mA | ||
- COO (Country of Origin):
- PH
The Broadcom ACHS series is a fully integrated hall effect-based isolated linear current sensor device family designed for AC or DC current sensing in industrial, commercial, and communications systems. Each of the ACHS series consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die.
Wide operating temperature: –40ºC to 110ºC
Primary conductor resistance: 0.7 mΩ typ.
Sensing current range: ±10A, ±20A, and ±30A
Output sensitivity: 66 to 185 mV/A
Output voltage proportional to AC or DC currents
Ratio metric output from supply voltage
Single supply operation: 5.0V
Low-noise analogue signal path