Melexis 3-Axis Surface Position Sensor 4.5 V 5.5 V, SPI, SOIC, 8-Pin
- RS 제품 번호:
- 237-7650
- 제조사 부품 번호:
- MLX90316KDC-BDG-100-RE
- 제조업체:
- Melexis
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩8,215.60
재고있음
- 153 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 9 | ₩8,215.60 |
| 10 - 99 | ₩8,065.20 |
| 100 - 499 | ₩7,933.60 |
| 500 - 999 | ₩7,783.20 |
| 1000 + | ₩7,651.60 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 237-7650
- 제조사 부품 번호:
- MLX90316KDC-BDG-100-RE
- 제조업체:
- Melexis
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Melexis | |
| Sensor Type | Position Sensor | |
| Product Type | Position Sensor | |
| Number of Axis | 3 | |
| Technology | Hall Effect | |
| Mount Type | Surface | |
| Magnetic Type | Monolithic | |
| Interface Type | SPI | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 5.5V | |
| Package Type | SOIC | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 8 | |
| Maximum Operating Temperature | 125°C | |
| Series | MLX90316 | |
| Height | 1.52mm | |
| Length | 4.8mm | |
| Standards/Approvals | RoHS | |
| Width | 3.81 mm | |
| Supply Current | 13.5mA | |
| Response Time | 400μs | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 Melexis | ||
Sensor Type Position Sensor | ||
Product Type Position Sensor | ||
Number of Axis 3 | ||
Technology Hall Effect | ||
Mount Type Surface | ||
Magnetic Type Monolithic | ||
Interface Type SPI | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 5.5V | ||
Package Type SOIC | ||
Minimum Operating Temperature -40°C | ||
Pin Count 8 | ||
Maximum Operating Temperature 125°C | ||
Series MLX90316 | ||
Height 1.52mm | ||
Length 4.8mm | ||
Standards/Approvals RoHS | ||
Width 3.81 mm | ||
Supply Current 13.5mA | ||
Response Time 400μs | ||
Automotive Standard No | ||
- COO (Country of Origin):
- MY
The Melexis position sensor IC providing the absolute angular position of a small dipole magnet rotating above the device surface. This monolithic device senses, in a contactless fashion, the horizontal component of the applied magnetic flux density. This unique sensing principle applied to a rotary position sensor results into an impressive robustness of the angular position over the mechanical (air gap, off-axis) tolerances. The output transfer characteristic is fully programmable to match any specific requirement through end-of-line calibration. The Melexis programming unit PTC-04 communicates and calibrates the device exclusively through the connector terminals.
Absolute rotary position sensor IC
Simple & robust magnetic design
Programmable angular range up to 360 degrees
Programmable linear transfer characteristic
Selectable analog (ratio metric), PWM, serial protocol
10 bit angular thermal accuracy
40 bit ID number
Single die – SOIC-8 package RoHS compliant
관련된 링크들
- Melexis 3-Axis Surface Mount Position Sensor, SPI
- Melexis Surface Mount Position Sensor, SOIC, 8-Pin
- Melexis 3-Axis Surface Mount Position Sensor, Digital PWM
- Melexis 3-Axis Surface Mount Hall Effect Sensor, I2C, SPI
- Melexis Surface Mount Hall Effect Sensor, UTQFN, 6-Pin
- Melexis Surface Mount Hall Effect Sensor, TSOT, 3-Pin
- Melexis Evaluation Board for the MLX90632 Evaluation Board MLX90632
- Broadcom 3-Axis Surface Mount Motion Sensor Module, Serial-SPI
