Melexis Surface Position Sensor 4.5 V 5.5 V, SPI, PWM, Analogue, SOIC, 8-Pin

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 reel of 3000 units)*

₩18,662,760.00

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2027년 1월 04일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
릴당*
3000 - 12000₩6,220.92₩18,660,504.00
15000 +₩6,094.96₩18,287,136.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
194-2929
제조사 부품 번호:
MLX90316KDC-BCG-000-RE
제조업체:
Melexis
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Melexis

Sensor Type

Position Sensor

Product Type

Position Sensor

Technology

Hall Technology

Mount Type

Surface

Magnetic Type

Hall

Interface Type

SPI, PWM, Analogue

Maximum Frequency Response

1000Hz

Minimum Frequency Response

100Hz

Minimum Supply Voltage

4.5V

Maximum Supply Voltage

5.5V

Package Type

SOIC

Minimum Operating Temperature

-40°C

Pin Count

8

Maximum Operating Temperature

125°C

Length

4.8mm

Height

1.72mm

Width

6.2 mm

Series

MLX90316

Standards/Approvals

RoHS Compliant

Response Time

4μs

Supply Current

16mA

Automotive Standard

No

The MLX90316 is a Triaxis® rotary position sensor IC providing the angular position of a small dipole magnet rotating above the device surface (end-of-shaft magnet). Thanks to an IMC on its surface, the monolithic device senses, in a contactless fashion, the horizontal component of the applied magnetic flux density.

This unique sensing principle applied to a rotary position sensor results into an impressive robustness of the angular position over the mechanical (air-gap, off-axis) tolerances. The rotation of this horizontal component is sensed over a wide range (up to 360º) and processed by the on-chip DSP to ultimately report the absolute angular position of the magnet either as a ratiometric analogue output or as Pulse-Width Modulation (PWM) signal or as a 14-bit data accessible through a 3-pin SPI (serial interface) channel.

The output transfer characteristic is fully programmable (e.g. offset, gain, clamping levels, linearity, thermal drift, filtering, range, ...) to match any specific requirement through end-of-line calibration.

관련된 링크들