Honeywell Surface Hall Effect Sensor 1.65 V 5.5 V, SOT-23, 3-Pin
- RS 제품 번호:
- 236-2724P
- 제조사 부품 번호:
- SM353LT
- 제조업체:
- Honeywell
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal 50 units (supplied on a continuous strip)*
₩63,638.00
일시적 품절
- 3,310 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 50 - 90 | ₩1,272.76 |
| 100 - 240 | ₩1,248.32 |
| 250 - 990 | ₩1,225.76 |
| 1000 + | ₩1,188.16 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 236-2724P
- 제조사 부품 번호:
- SM353LT
- 제조업체:
- Honeywell
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Honeywell | |
| Sensor Type | Position Sensor | |
| Product Type | Hall Effect Sensor | |
| Technology | Digital | |
| Mount Type | Surface | |
| Magnetic Type | Omnipolar | |
| Minimum Supply Voltage | 1.65V | |
| Maximum Supply Voltage | 5.5V | |
| Package Type | SOT-23 | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 85°C | |
| Series | Nanopower | |
| Length | 2.9mm | |
| Standards/Approvals | RoHS | |
| Width | 2.8 mm | |
| Height | 1.4mm | |
| Automotive Standard | No | |
| Supply Current | 360nA | |
| 모두 선택 | ||
|---|---|---|
브랜드 Honeywell | ||
Sensor Type Position Sensor | ||
Product Type Hall Effect Sensor | ||
Technology Digital | ||
Mount Type Surface | ||
Magnetic Type Omnipolar | ||
Minimum Supply Voltage 1.65V | ||
Maximum Supply Voltage 5.5V | ||
Package Type SOT-23 | ||
Minimum Operating Temperature -40°C | ||
Pin Count 3 | ||
Maximum Operating Temperature 85°C | ||
Series Nanopower | ||
Length 2.9mm | ||
Standards/Approvals RoHS | ||
Width 2.8 mm | ||
Height 1.4mm | ||
Automotive Standard No | ||
Supply Current 360nA | ||
- COO (Country of Origin):
- CN
The Honeywell Nanopower series magneto resistive (MR) sensor ICs are ultra-sensitive device designed to accommodate a wide range of applications with large Air gaps, small magnetic field and low power requirements. The sensor ICs respond to either a north or south pole applied in a direction parallel to the sensor. They do not require the magnet polarity to be identified, simplifying installation and potentially reducing system cost. The sensor ICs use a very low average current consumption and a push-pull output which does not require a pull-up resistor. The sensor ICs can operate from a supply voltage as low as 1.65 V, promoting energy efficiency.
Temperature range -40 °C to 85 °C
Non-chopper stabilized design
High sensitivity
관련된 링크들
- Honeywell Surface Hall Effect Sensor 1.65 V 5.5 V, SOT-23, 3-Pin
- Honeywell Surface Hall Effect Sensor 2.2 V 5.5 V, SOT-23, 3-Pin
- Honeywell Surface Hall Effect Sensor 1.65 V 5.5 V, Push Pull, SOT-23, 3-Pin
- Honeywell Surface Hall Effect Sensor 3 V 24 V, SOT-23, 3-Pin
- Honeywell Surface Hall Effect Sensor 4.5 V 24 V, SOT-23, 3-Pin
- Honeywell Surface Hall Effect Sensor -28 V 28 V, SOT-23, 3-Pin
- Honeywell Surface Hall Effect Sensor 3 V 26 V, SOT-23, 3-Pin
- Honeywell Surface Hall Effect Sensor 3 V 24 V, IC, SOT-23, 3-Pin