Murata 3-Axis Surface High Performance Accelerometer 3 V 3.6 V, SPI, Surface Mount, 12-Pin
- RS 제품 번호:
- 171-0669
- 제조사 부품 번호:
- SCA3100-D04-004
- 제조업체:
- Murata
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 Bag of 4 units)*
₩213,402.56
마지막 RS 재고
- 최종적인 4 개 unit(s)이 배송 준비 됨
수량 | 한팩당 | Per Bag* |
|---|---|---|
| 4 - 4 | ₩53,350.64 | ₩213,398.80 |
| 8 - 12 | ₩52,015.84 | ₩208,059.60 |
| 16 + | ₩51,214.96 | ₩204,863.60 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 171-0669
- 제조사 부품 번호:
- SCA3100-D04-004
- 제조업체:
- Murata
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Murata | |
| Product Type | High Performance Accelerometer | |
| Sensor Type | Accelerometer | |
| Number of Axis | 3 | |
| Technology | Digital | |
| Mount Type | Surface | |
| Interface Type | SPI | |
| Maximum Frequency Response | 55Hz | |
| Minimum Frequency Response | 30Hz | |
| Minimum Supply Voltage | 3V | |
| Package Type | Surface Mount | |
| Maximum Supply Voltage | 3.6V | |
| Sensitivity | 900Counts/g | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 12 | |
| Maximum Operating Temperature | 125°C | |
| Length | 8.6mm | |
| Width | 7.6 mm | |
| Series | SCA3100 | |
| Standards/Approvals | ELV, RoHS | |
| Height | 3.3mm | |
| Automotive Standard | AEC-Q100 | |
| Supply Current | 5mA | |
| 모두 선택 | ||
|---|---|---|
브랜드 Murata | ||
Product Type High Performance Accelerometer | ||
Sensor Type Accelerometer | ||
Number of Axis 3 | ||
Technology Digital | ||
Mount Type Surface | ||
Interface Type SPI | ||
Maximum Frequency Response 55Hz | ||
Minimum Frequency Response 30Hz | ||
Minimum Supply Voltage 3V | ||
Package Type Surface Mount | ||
Maximum Supply Voltage 3.6V | ||
Sensitivity 900Counts/g | ||
Minimum Operating Temperature -40°C | ||
Pin Count 12 | ||
Maximum Operating Temperature 125°C | ||
Length 8.6mm | ||
Width 7.6 mm | ||
Series SCA3100 | ||
Standards/Approvals ELV, RoHS | ||
Height 3.3mm | ||
Automotive Standard AEC-Q100 | ||
Supply Current 5mA | ||
- COO (Country of Origin):
- FI
Accelerometer ICs, Murata
Murata's low-g acceleration sensors include high performance digital and analog accelerometers for both safety critical automotive and industrial applications. Based on 3D MEMS technology and intended for horizontal or vertical measurements. The sensing element and the measuring ASIC are assembled in a dual-in-line or dual-in-flat-line plastic package with pins for surface mount and re-flow soldering.
The zero point temperature dependence is less than 1mg/°C. Environmentally protected with silicone gel for high reliability in a humid environment and during temperature cycling. The sensing element design with over damped frequency response enables excellent performance even in harsh and vibrating environments.
The measuring direction is parallel or perpendicular to the mounting plane. The ASIC includes an on-chip EEPROM memory with the calibration coefficients for unit interchangeability.
Murata accelerometers include failure detection: digitally activated self-test, calibration memory parity or check sum check and continuous connection failure detection.
Accelerometers, Murata
관련된 링크들
- Murata 3-Axis Surface High Performance Accelerometer 3 V 3.6 V, SPI, Surface Mount, 12-Pin
- Murata 1-Axis Surface Inclinometer 3 V 3.6 V, SPI, Surface Mount, 12-Pin
- STMicroelectronics 3-Axis Surface Accelerometer 1.71 V 3.6 V, SPI, LGA, 16-Pin
- InvenSense 6-Axis Surface Mount Accelerometer & Gyroscope, LGA, I2C, SPI, 14-Pin
- Murata 3-Axis Surface Accelerometer & Gyroscope 3 V 3.6 V, SPI, SOIC, 32-Pin
- STMicroelectronics 3-Axis Surface Accelerometer 3.6 V 1.71 V, SPI, LGA, 12-Pin
- STMicroelectronics 3-Axis Surface Accelerometer 1.71 V 3.6 V, I2C, SPI, LGA, 14-Pin
- STMicroelectronics 3-Axis Surface Accelerometer 1.71 V 3.6 V, I2C/SPI, LGA, 14-Pin