Name: STMicroelectronics 3 Axis Surface Accelerometer 1.71 V 3.6V, SPI, LGA, 16-Pin
Brand: STMicroelectronics
SKU: 190-8462
Availability: OutOfStock

현재 비가용

RS는 이 제품을 더 이상 판매하지 않습니다.

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	STMicroelectronics
	Sensor Type	Accelerometer
	Product Type	Accelerometer
	Number of Axis	3
	Technology	Digital
	Mount Type	Surface
	Interface Type	SPI
	Maximum Frequency Response	440Hz
	Minimum Frequency Response	235Hz
	Minimum Supply Voltage	1.71V
	Package Type	LGA
	Maximum Supply Voltage	3.6V
	Minimum Operating Temperature	-40°C
	Sensitivity	0.08mg/digit
	Pin Count	16
	Maximum Operating Temperature	85°C
	Series	LIS3DHH
	Length	5mm
	Height	1.7mm
	Standards/Approvals	No
	Width	5mm
	Supply Current	5mA
	Automotive Standard	No

	모두 선택
	브랜드 STMicroelectronics
	Sensor Type Accelerometer
	Product Type Accelerometer
	Number of Axis 3
	Technology Digital
	Mount Type Surface
	Interface Type SPI
	Maximum Frequency Response 440Hz
	Minimum Frequency Response 235Hz
	Minimum Supply Voltage 1.71V
	Package Type LGA
	Maximum Supply Voltage 3.6V
	Minimum Operating Temperature -40°C
	Sensitivity 0.08mg/digit
	Pin Count 16
	Maximum Operating Temperature 85°C
	Series LIS3DHH
	Length 5mm
	Height 1.7mm
	Standards/Approvals No
	Width 5mm
	Supply Current 5mA
	Automotive Standard No

Features:

- 3-axis, ±2.5 g full-scale

- Ultra-low noise performance: 45 μg/√Hz

- Excellent stability over temperature (<0.4 mg/°C) and time

- 16-bit data output

- SPI 4-wire digital output interface

- Embedded temperature sensor

- 12-bit temperature data output

- Embedded FIFO (depth 32 levels)

- High shock survivability

- Extended operating temperature range (-40 °C to +85 °C)

- ECOPACK®, RoHS and “Green” compliant

Description:

The LIS3DHH is an ultra-high-resolution and low noise three-axis linear accelerometer.

The LIS3DHH has a full scale of 2.5 g and is capable of providing the measured accelerations to the application through an SPI 4-wire digital interface.

The sensing element is manufactured using a dedicated micromachining process developed by STMicroelectronics to produce inertial sensors and actuators on silicon wafers.

The IC interface is manufactured using a CMOS process that allows a high level of integration to design a dedicated circuit which is trimmed to better match the characteristics of the sensing element.

The LIS3DHH is available in a high-performance (low-stress) ceramic cavity land grid array (CC LGA) package and can operate within a temperature range of -40 °C to +85 °C.

STMicroelectronics 3 Axis Surface Accelerometer 1.71 V 3.6V, SPI, LGA, 16-Pin

관련된 링크들