Allegro Microsystems Through Hole Chopper Stabilised Precision Hall Effect Switch 3 V 24 V, SIP, 3-Pin
- RS 제품 번호:
- 170-9086
- 제조사 부품 번호:
- A1120EUA-T
- 제조업체:
- Allegro Microsystems
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 Bag of 500 units)*
₩536,740.00
재고있음
- 9,500 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | Per Bag* |
|---|---|---|
| 500 - 500 | ₩1,073.48 | ₩536,552.00 |
| 1000 - 1500 | ₩1,050.92 | ₩525,742.00 |
| 2000 + | ₩1,030.24 | ₩515,026.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 170-9086
- 제조사 부품 번호:
- A1120EUA-T
- 제조업체:
- Allegro Microsystems
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Allegro Microsystems | |
| Sensor Type | Hall Effect Sensors | |
| Product Type | Chopper Stabilised Precision Hall Effect Switch | |
| Technology | Chopper Stabilised Hall Effect | |
| Mount Type | Through Hole | |
| Magnetic Type | Unipolar | |
| Maximum Frequency Response | 800kHz | |
| Minimum Supply Voltage | 3V | |
| Package Type | SIP | |
| Maximum Supply Voltage | 24V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Pin Count | 3 | |
| Standards/Approvals | RoHS, 100% matte tin plated leadframe, Lead (Pb) Free | |
| Width | 1.52 mm | |
| Length | 4.09mm | |
| Series | A1120 | |
| Height | 3.02mm | |
| Automotive Standard | AEC-Q100 | |
| Supply Current | 4mA | |
| Response Time | 25μs | |
| 모두 선택 | ||
|---|---|---|
브랜드 Allegro Microsystems | ||
Sensor Type Hall Effect Sensors | ||
Product Type Chopper Stabilised Precision Hall Effect Switch | ||
Technology Chopper Stabilised Hall Effect | ||
Mount Type Through Hole | ||
Magnetic Type Unipolar | ||
Maximum Frequency Response 800kHz | ||
Minimum Supply Voltage 3V | ||
Package Type SIP | ||
Maximum Supply Voltage 24V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Pin Count 3 | ||
Standards/Approvals RoHS, 100% matte tin plated leadframe, Lead (Pb) Free | ||
Width 1.52 mm | ||
Length 4.09mm | ||
Series A1120 | ||
Height 3.02mm | ||
Automotive Standard AEC-Q100 | ||
Supply Current 4mA | ||
Response Time 25μs | ||
A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is MADE possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.
They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.
For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.
Unipolar switchpoints
Resistant to physical stress
Superior temperature stability
Output short circuit protection
Operation from unregulated supply
Hall Effect Sensors, Allegro MicroSystems
관련된 링크들
- Allegro Microsystems Through Hole Chopper Stabilised Precision Hall Effect Switch 3 V 24 V, SIP, 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor 3.8 V 24 V, Ultra Mini SIP, 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor 3 V 24 V, SIP, 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor 2.4 V 5.5 V, Ultra Mini SIP, 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor 4.5 V 5.5 V, SIP, 3-Pin
- Allegro Microsystems 1-Axis Through Hole Hall Effect Sensor 4.5 V 5.5 V, SIP, 3-Pin
- Allegro Microsystems 1-Axis Through Hole Hall Effect Sensor 3 V 3.6 V, Analogue, SIP, 3-Pin
- Allegro Microsystems 1-Axis Through Hole Hall Effect Sensor 3.8 V 24 V, Ultra Mini SIP, 3-Pin