Infineon OptiMOS Type N-Channel MOSFET, 540 mA, 55 V Enhancement, 3-Pin SOT-23

RS 제품 번호:: 827-0027
제조사 부품 번호:: BSS670S2LH6327XTSA1
제조업체:: Infineon

Infineon OptiMOS Type N-Channel MOSFET, 540 mA, 55 V Enhancement, 3-Pin SOT-23

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 reel of 250 units)*

₩58,000.00

추가로 2026년 8월 24일 부터 10,250 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	릴당*
250 - 500	₩232.00	₩57,850.00
750 +	₩226.00	₩56,400.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 827-0027
제조사 부품 번호:: BSS670S2LH6327XTSA1
제조업체:: Infineon

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Infineon
	Product Type	MOSFET
	Channel Type	Type N
	Maximum Continuous Drain Current Id	540mA
	Maximum Drain Source Voltage Vds	55V
	Series	OptiMOS
	Package Type	SOT-23
	Mount Type	Surface
	Pin Count	3
	Maximum Drain Source Resistance Rds	825mΩ
	Channel Mode	Enhancement
	Minimum Operating Temperature	-55°C
	Maximum Power Dissipation Pd	360mW
	Forward Voltage Vf	0.8V
	Typical Gate Charge Qg @ Vgs	1.7nC
	Maximum Operating Temperature	150°C
	Standards/Approvals	No
	Length	2.9mm
	Height	1mm
	Automotive Standard	AEC-Q101

	모두 선택
	브랜드 Infineon
	Product Type MOSFET
	Channel Type Type N
	Maximum Continuous Drain Current Id 540mA
	Maximum Drain Source Voltage Vds 55V
	Series OptiMOS
	Package Type SOT-23
	Mount Type Surface
	Pin Count 3
	Maximum Drain Source Resistance Rds 825mΩ
	Channel Mode Enhancement
	Minimum Operating Temperature -55°C
	Maximum Power Dissipation Pd 360mW
	Forward Voltage Vf 0.8V
	Typical Gate Charge Qg @ Vgs 1.7nC
	Maximum Operating Temperature 150°C
	Standards/Approvals No
	Length 2.9mm
	Height 1mm
	Automotive Standard AEC-Q101

Infineon OptiMOS Series MOSFET, 55V Drain Source Voltage, 540mA Continuous Drain Current - BSS670S2LH6327XTSA1

This MOSFET is a small-signal N-channel transistor designed for surface-mounted switching in compact electronic systems. It is intended for applications that require controlled enhancement-mode switching with moderate voltage and current ratings, and is qualified for automotive environments.

Features and Benefits:

• 55V drain tolerance enables higher-voltage switching circuits
• 825mΩ low RDS(on) minimises conduction losses in low-current paths
• 540mA continuous drain current supports steady-state loads
• 1.7nC typical gate charge allows efficient high-speed switching
• 360mW power dissipation suits modest thermal budgets
• -55°C to 150°C operating range accommodates wide-temperature environments

Applications

• Suitable for automotive sensor-interface switching
• Ideal for DC load switching in compact modules
• Used with battery-management auxiliary circuits
• Can be used for gate drivers in low-power converters
• Used for signal-level switching on mixed-signal boards

What mounting considerations apply to small packages?

The device is supplied in a three-pin SOT-23 package intended for surface mounting, so land-pattern thermal relief and solder fillets should be planned to manage its 360mW dissipation.

How does gate drive affect switching performance?

Driving the gate up to 20V increases conduction margin, while the 1.7nC gate charge determines required driver current for desired rise/fall times.

What is the device’s behaviour under continuous load?

It can carry up to 540mA continuously, provided thermal constraints are respected and ambient conditions allow sufficient heat transfer.

Is this component suitable for automotive qualification needs?

It meets AEC‑Q101 requirements, making it appropriate for automotive electronic applications that require that standard.