제조사부품번호

Vishay SI1427EDH Type P-Channel MOSFET, -2 A, -20 V, 6-Pin SC-70 SI1427EDH-T1-GE3

RS 제품 번호:: 256-7340
제조사 부품 번호:: SI1427EDH-T1-GE3
제조업체:: Vishay

Vishay SI1427EDH Type P-Channel MOSFET, -2 A, -20 V, 6-Pin SC-70 SI1427EDH-T1-GE3

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

Subtotal (1 reel of 3000 units)*

₩1,014,000.00

일시적 품절

2027년 5월 24일 부터 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	릴당*
3000 +	₩338.00	₩1,016,400.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 256-7340
제조사 부품 번호:: SI1427EDH-T1-GE3
제조업체:: Vishay

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Vishay
	Channel Type	Type P
	Product Type	MOSFET
	Maximum Continuous Drain Current Id	-2A
	Maximum Drain Source Voltage Vds	-20V
	Package Type	SC-70
	Series	SI1427EDH
	Mount Type	Surface
	Pin Count	6
	Maximum Drain Source Resistance Rds	0.165Ω
	Forward Voltage Vf	-1.2V
	Maximum Gate Source Voltage Vgs	8V
	Typical Gate Charge Qg @ Vgs	7.6nC
	Minimum Operating Temperature	-55°C
	Maximum Power Dissipation Pd	2.8W
	Maximum Operating Temperature	+150°C
	Height	1.1mm
	Standards/Approvals	RoHS
	Automotive Standard	No

	모두 선택
	브랜드 Vishay
	Channel Type Type P
	Product Type MOSFET
	Maximum Continuous Drain Current Id -2A
	Maximum Drain Source Voltage Vds -20V
	Package Type SC-70
	Series SI1427EDH
	Mount Type Surface
	Pin Count 6
	Maximum Drain Source Resistance Rds 0.165Ω
	Forward Voltage Vf -1.2V
	Maximum Gate Source Voltage Vgs 8V
	Typical Gate Charge Qg @ Vgs 7.6nC
	Minimum Operating Temperature -55°C
	Maximum Power Dissipation Pd 2.8W
	Maximum Operating Temperature +150°C
	Height 1.1mm
	Standards/Approvals RoHS
	Automotive Standard No

Datasheet - SI1427EDH-T1-GE3

Vishay SI1427EDH Series MOSFET, 20V Maximum Drain Source Voltage, 2A Maximum Continuous Drain Current - SI1427EDH-T1-GE3

This p-channel MOSFET is a surface-mount semiconductor intended for switching and power-management roles in compact electronic assemblies. It operates across a wide temperature span suitable for demanding conditions and is provided in a low-profile package for space-constrained board designs.

Features and Benefits:

• Low Rds(on) 0.165Ω for reduced conduction losses
• Continuous drain current rating of 2A for medium-power switching
• Drain-source voltage rating of 20V enables low-voltage systems
• Typical gate charge 7.6 nC for predictable switching performance
• Forward voltage of -1.2V minimises voltage drop during conduction
• RoHS compliant for use in regulated manufacturing environments

Applications

• Suitable for battery-protection and load-switch circuits
• Ideal for handheld and portable device power paths
• Used with DC-DC converters in compact assemblies
• Can be used for reverse-current blocking in power rails
• Suitable for low-voltage motor-control gate arrangements

What package considerations affect board layout?

It is supplied in an SC-70 package with six pins, permitting tight pad arrangements and straightforward reflow soldering for dense surface-mount designs.

How does thermal performance influence cooling requirements?

Maximum power dissipation is 2.8 W, so PCB copper area and thermal vias should be sized to remove heat when operating near that dissipation level.

What gate limitations must designers observe?

The gate must not exceed 8V relative to the source to avoid damaging the device, and the typical gate charge of 7.6 nC guides driver selection.

How does the device cope with extreme ambient conditions?

It is rated to function from -55 °C up to +150 °C, permitting use where wide thermal endurance is required.