제조사부품번호

Infineon SIPMOS Type P-Channel MOSFET, 620 mA, 60 V Enhancement, 3-Pin SC-59

RS 제품 번호:: 215-2468
제조사 부품 번호:: BSR315PH6327XTSA1
제조업체:: Infineon

Infineon SIPMOS Type P-Channel MOSFET, 620 mA, 60 V Enhancement, 3-Pin SC-59

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 reel of 3000 units)*

₩1,140,000.00

일시적 품절

2026년 12월 14일 부터 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	릴당*
3000 - 12000	₩380.00	₩1,140,000.00
15000 +	₩372.00	₩1,117,200.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 215-2468
제조사 부품 번호:: BSR315PH6327XTSA1
제조업체:: Infineon

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Infineon
	Channel Type	Type P
	Product Type	MOSFET
	Maximum Continuous Drain Current Id	620mA
	Maximum Drain Source Voltage Vds	60V
	Package Type	SC-59
	Series	SIPMOS
	Mount Type	Surface
	Pin Count	3
	Maximum Drain Source Resistance Rds	800mΩ
	Channel Mode	Enhancement
	Typical Gate Charge Qg @ Vgs	6nC
	Minimum Operating Temperature	-55°C
	Forward Voltage Vf	-1.2V
	Maximum Power Dissipation Pd	0.5W
	Maximum Operating Temperature	150°C
	Standards/Approvals	No
	Automotive Standard	No

	모두 선택
	브랜드 Infineon
	Channel Type Type P
	Product Type MOSFET
	Maximum Continuous Drain Current Id 620mA
	Maximum Drain Source Voltage Vds 60V
	Package Type SC-59
	Series SIPMOS
	Mount Type Surface
	Pin Count 3
	Maximum Drain Source Resistance Rds 800mΩ
	Channel Mode Enhancement
	Typical Gate Charge Qg @ Vgs 6nC
	Minimum Operating Temperature -55°C
	Forward Voltage Vf -1.2V
	Maximum Power Dissipation Pd 0.5W
	Maximum Operating Temperature 150°C
	Standards/Approvals No
	Automotive Standard No

Datasheet - BSR315PH6327XTSA1

Infineon SIPMOS Series MOSFET, 60V Maximum Drain Source Voltage, 620mA Maximum Continuous Drain Current - BSR315PH6327XTSA1

This MOSFET is a P‑channel enhancement device designed for switching and signal control in compact surface‑mount assemblies. It operates across a wide temperature range and is intended for applications requiring modest continuous current handling and low power loss in a small SC‑59 package. The component is suitable where a low gate‑charge switching element and straightforward gate‑drive capability are required.

Features and Benefits:

• 60V maximum drain voltage enables higher-voltage switching
• 800mΩ Rds(on) reduces conduction losses at low currents
• 0.62A continuous drain current supports small‑signal loads
• 6nC typical gate charge enables faster switching transitions
• 0.5W power dissipation suits low‑power surface‑mount designs
• -55°C to 150°C rating for extended temperature environments

Applications

• Used for low‑voltage battery protection circuits
• Suitable for portable device power‑path switching
• Ideal for signal‑level polarity control in modules
• Can be used for small motor‑drive gate stages
• Used with thermal‑management‑limited SMD assemblies

What gate‑drive limitations should I consider?

The gate may be driven up to ±20V relative to the source, so ensure gate‑drive circuitry stays within this voltage range.

How does the thermal environment affect continuous current handling?

The 0.5W dissipation limit constrains current under high ambient temperatures

adequate PCB thermal relief or derating is required to maintain 0.62A continuous current.

What are the mounting considerations for assembly?

It is supplied in an SC‑59 surface‑mount package with three pins, so standard SMD reflow profiles and the correct land‑pattern design are recommended.

Is this device suited for automotive specification programmes?

It is not classified to automotive standards and should not be specified where automotive‑grade certification is mandated.