Infineon OptiMOS Type N-Channel MOSFET, 100 A, 30 V Enhancement, 8-Pin TDSON

RS 제품 번호:: 178-7496
제조사 부품 번호:: BSC011N03LSIATMA1
제조업체:: Infineon

Infineon OptiMOS Type N-Channel MOSFET, 100 A, 30 V Enhancement, 8-Pin TDSON

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 reel of 5000 units)*

₩7,030,000.00

10,000 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	릴당*
5000 - 20000	₩1,406.00	₩7,031,000.00
25000 +	₩1,378.00	₩6,891,000.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 178-7496
제조사 부품 번호:: BSC011N03LSIATMA1
제조업체:: Infineon

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Infineon
	Channel Type	Type N
	Product Type	MOSFET
	Maximum Continuous Drain Current Id	100A
	Maximum Drain Source Voltage Vds	30V
	Package Type	TDSON
	Series	OptiMOS
	Mount Type	Surface
	Pin Count	8
	Maximum Drain Source Resistance Rds	1.4mΩ
	Channel Mode	Enhancement
	Forward Voltage Vf	0.7V
	Minimum Operating Temperature	-55°C
	Typical Gate Charge Qg @ Vgs	34nC
	Maximum Power Dissipation Pd	96W
	Maximum Operating Temperature	150°C
	Height	1.1mm
	Standards/Approvals	No
	Length	6.1mm
	Automotive Standard	No

	모두 선택
	브랜드 Infineon
	Channel Type Type N
	Product Type MOSFET
	Maximum Continuous Drain Current Id 100A
	Maximum Drain Source Voltage Vds 30V
	Package Type TDSON
	Series OptiMOS
	Mount Type Surface
	Pin Count 8
	Maximum Drain Source Resistance Rds 1.4mΩ
	Channel Mode Enhancement
	Forward Voltage Vf 0.7V
	Minimum Operating Temperature -55°C
	Typical Gate Charge Qg @ Vgs 34nC
	Maximum Power Dissipation Pd 96W
	Maximum Operating Temperature 150°C
	Height 1.1mm
	Standards/Approvals No
	Length 6.1mm
	Automotive Standard No

BSC047N08NS3G

Infineon OptiMOS Series MOSFET, 30V Maximum Drain Source Voltage, 100A Maximum Continuous Drain Current - BSC011N03LSIATMA1

This MOSFET is a power switching transistor designed for high-current, low-voltage applications in surface-mounted assemblies. It operates across a wide temperature span and is intended for use where efficient conduction and rapid gate control are required. The device is supplied in an eight-pin TDSON package and is intended to be mounted directly onto circuit board surfaces.

Features and Benefits:

• Very low on-resistance 1.4mΩ reduces conduction losses
• High continuous drain current 100A supports heavy loads
• Low forward voltage Vf 0.7V improves efficiency under load
• Moderate gate charge 34nC enables relatively fast switching
• Maximum drain-source voltage 30V allows low-voltage power stages
• Power dissipation 96W sustains elevated thermal stress

Applications

• Suitable for synchronous buck converters in power supplies
• Ideal for motor-drive stages requiring high current
• Used with battery-management circuits in high-discharge systems
• Can be used for DC-DC converters in telecom equipment
• Used for high-current load switching on surface-mount boards

What gate voltage limits should I observe for safe operation?

The gate-to-source rating is limited to 20V maximum, so gate drive should be kept within this range to prevent dielectric or gate-oxide stress.

How does thermal performance relate to ambient extremes?

The device is specified to operate from -55°C up to 150°C junction temperature, permitting use in environments with wide temperature variation provided adequate thermal management is applied.

What mounting and footprint considerations are required?

It is supplied in a TDSON package with eight pins for surface mounting

ensure PCB thermal vias and copper area accommodate the 96W dissipation and high current paths.

How does channel type influence circuit topology choices?

The N-channel enhancement mode requires the gate to be driven positive relative to source for conduction, making it suitable as a low-side switch or in synchronous arrangements.