Infineon OptiMOS 2 Type N-Channel MOSFET, 1.4 A, 20 V Enhancement, 3-Pin SC-70 BSS816NWH6327XTSA1

RS 제품 번호:: 110-7113
제조사 부품 번호:: BSS816NWH6327XTSA1
제조업체:: Infineon

Infineon OptiMOS 2 Type N-Channel MOSFET, 1.4 A, 20 V Enhancement, 3-Pin SC-70 BSS816NWH6327XTSA1

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 pack of 300 units)*

₩58,800.00

추가로 2026년 8월 24일 부터 31,500 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	한팩당*
300 - 600	₩196.00	₩58,740.00
900 - 1200	₩190.00	₩57,240.00
1500 +	₩188.00	₩56,400.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 110-7113
제조사 부품 번호:: BSS816NWH6327XTSA1
제조업체:: Infineon

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Infineon
	Channel Type	Type N
	Product Type	MOSFET
	Maximum Continuous Drain Current Id	1.4A
	Maximum Drain Source Voltage Vds	20V
	Package Type	SC-70
	Series	OptiMOS 2
	Mount Type	Surface
	Pin Count	3
	Maximum Drain Source Resistance Rds	240mΩ
	Channel Mode	Enhancement
	Typical Gate Charge Qg @ Vgs	0.6nC
	Minimum Operating Temperature	-40°C
	Forward Voltage Vf	1.1V
	Maximum Power Dissipation Pd	500mW
	Maximum Operating Temperature	175°C
	Standards/Approvals	No
	Height	0.8mm
	Length	2mm
	Automotive Standard	AEC-Q101

	모두 선택
	브랜드 Infineon
	Channel Type Type N
	Product Type MOSFET
	Maximum Continuous Drain Current Id 1.4A
	Maximum Drain Source Voltage Vds 20V
	Package Type SC-70
	Series OptiMOS 2
	Mount Type Surface
	Pin Count 3
	Maximum Drain Source Resistance Rds 240mΩ
	Channel Mode Enhancement
	Typical Gate Charge Qg @ Vgs 0.6nC
	Minimum Operating Temperature -40°C
	Forward Voltage Vf 1.1V
	Maximum Power Dissipation Pd 500mW
	Maximum Operating Temperature 175°C
	Standards/Approvals No
	Height 0.8mm
	Length 2mm
	Automotive Standard AEC-Q101

Infineon OptiMOS 2 Series MOSFET, 20V Maximum Drain Source Voltage, 1.4A Maximum Continuous Drain Current - BSS816NWH6327XTSA1

This MOSFET is a compact N‑channel enhancement device designed for low-voltage switching in automotive and industrial electronic systems. It operates across an extended temperature range and is intended for surface-mount applications where a small footprint and modest power handling are required.

Features and Benefits:

• Low on-resistance 240 mΩ reduces conduction losses and heat
• Maximum drain current 1.4A enables moderate load switching
• Drain-source voltage rating 20V supports typical automotive rails
• Gate charge 0.6 nC allows faster gate drive and reduced switching loss
• Power dissipation 500 mW permits sustained operation under light load
• Gate-source limit 8V protects against excessive drive voltages

Applications

• Suitable for switch stages in automotive sensor modules
• Ideal for load switching in 12V auxiliary circuits
• Used with battery-management peripherals requiring a small footprint
• Can be used for signal‑level power control in infotainment systems
• Applicable to compact motor‑drive gate stages for low currents

What package suits high-density board layouts?

It is supplied in an SC-70 surface-mount package that minimises board area and supports automated placement.

How does it perform in elevated ambient temperatures?

The device is specified for operation from -40 °C up to 175 °C, allowing use in harsh thermal environments typical of under‑bonnet automotive locations.

What drive voltage range should be applied to the gate?

The maximum permissible gate‑to‑source voltage is 8V, so gate drivers should be selected to remain within this limit.

How does the device balance switching speed and gate drive energy?

With a typical gate charge of 0.6 nC it requires relatively low energy to switch, aiding efficiency in systems with repetitive transitions.