Vishay SQS201CENW Type P-Channel Single MOSFETs, -16 A, -100 V Enhancement, 8-Pin PowerPAK

RS 제품 번호:: 653-189
제조사 부품 번호:: SQS201CENW-T1_GE3
제조업체:: Vishay

Vishay SQS201CENW Type P-Channel Single MOSFETs, -16 A, -100 V Enhancement, 8-Pin PowerPAK

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 tape of 1 unit)*

₩1,267.50

1,379 개 단위 배송 준비 완료
추가로 2026년 9월 25일 부터 3,000 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

Tape(s)	Per Tape
1 - 24	₩1,267.50
25 - 99	₩1,228.50
100 - 499	₩1,209.00
500 - 999	₩1,033.50
1000 +	₩955.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 653-189
제조사 부품 번호:: SQS201CENW-T1_GE3
제조업체:: Vishay

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Vishay
	Product Type	Single MOSFETs
	Channel Type	Type P
	Maximum Continuous Drain Current Id	-16A
	Maximum Drain Source Voltage Vds	-100V
	Series	SQS201CENW
	Package Type	PowerPAK
	Mount Type	PCB
	Pin Count	8
	Maximum Drain Source Resistance Rds	0.0800Ω
	Channel Mode	Enhancement
	Maximum Gate Source Voltage Vgs	20V
	Forward Voltage Vf	-1.1V
	Typical Gate Charge Qg @ Vgs	26nC
	Minimum Operating Temperature	-55°C
	Maximum Power Dissipation Pd	62.5W
	Maximum Operating Temperature	175°C
	Length	3.30mm
	Standards/Approvals	RoHS
	Width	3.30mm
	Height	0.41mm
	Automotive Standard	AEC-Q101

	모두 선택
	브랜드 Vishay
	Product Type Single MOSFETs
	Channel Type Type P
	Maximum Continuous Drain Current Id -16A
	Maximum Drain Source Voltage Vds -100V
	Series SQS201CENW
	Package Type PowerPAK
	Mount Type PCB
	Pin Count 8
	Maximum Drain Source Resistance Rds 0.0800Ω
	Channel Mode Enhancement
	Maximum Gate Source Voltage Vgs 20V
	Forward Voltage Vf -1.1V
	Typical Gate Charge Qg @ Vgs 26nC
	Minimum Operating Temperature -55°C
	Maximum Power Dissipation Pd 62.5W
	Maximum Operating Temperature 175°C
	Length 3.30mm
	Standards/Approvals RoHS
	Width 3.30mm
	Height 0.41mm
	Automotive Standard AEC-Q101

Datasheet - SQS201CENW-T1_GE3

COO (Country of Origin):: CN

Vishay SQS201CENW Series Single MOSFETs, -100V Maximum Drain Source Voltage, -16A Maximum Continuous Drain Current - SQS201CENW-T1_GE3

This single MOSFET is a P-channel enhancement device intended for power-switching functions in electronic systems, particularly where automotive-grade robustness is required. It is designed for PCB mounting in a PowerPAK package and offers a balance of current handling and voltage capability suited to demanding industrial and vehicular control environments.

Features and Benefits:

• P-channel device enabling high-side switching in circuits • 100V drain-to-source rating allowing large voltage margins • -16A continuous drain current for substantial load capability • 0.08Ω Rds(on) minimising conduction losses under load • 26nC typical gate charge supporting moderate switching speeds • 62.5W power dissipation handling significant thermal stress

Applications

• Suitable for high-side power switching in automotive modules • Ideal for motor-drive protection and control circuits • Used for battery management and power distribution systems • Can be used for industrial automation logic-level power stages

What gate voltage limits should be observed during design?

The gate-to-source excursion must not exceed 20V to prevent device stress.

How does the device behave at temperature extremes in practice?

It is specified to operate from -55°C up to 175°C, enabling use in harsh thermal environments without exceeding its rated limits.

What package considerations affect PCB layout and cooling?

The PowerPAK 8-pin footprint influences thermal conduction paths and requires adequate PCB copper for heat dissipation to make use of the 62.5W power-handling capacity.

Are there specific standards influencing selection for automotive use?

It meets the AEC‑Q101 automotive qualification, indicating suitability for vehicle electronic applications under that standard.