Toshiba, 27 Dual Monostable Multivibrator 74VHC 8 mA, 16-Pin TSSOP

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal 650 units (supplied on a reel)*

₩190,632.00

Add to Basket
수량 선택 또는 입력
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량
한팩당
650 - 1200₩293.28
1250 +₩289.52

* 참고 가격: 실제 구매가격과 다를 수 있습니다

포장 옵션
RS 제품 번호:
171-3598P
제조사 부품 번호:
74VHC123AFT
제조업체:
Toshiba
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Toshiba

Logic Family

74VHC

Product Type

Dual Monostable Multivibrator

Number of Elements per Chip

27

Maximum High Level Output Current

-8mA

Maximum Low Level Output Current

8mA

Minimum Pulse Width

5ns

Maximum Quiescent Current

80μA

Mount Type

Surface

Minimum Supply Voltage

2V

Package Type

TSSOP

Maximum Supply Voltage

5.5V

Maximum Propagation Delay Time @ CL

8.1ns

Minimum Operating Temperature

-40°C

Multivibrator Type

Monostable Multivibrator

Pin Count

16

Maximum Operating Temperature

125°C

Length

5mm

Width

4.4 mm

Height

1mm

Series

74VHC123AFT

Standards/Approvals

No

Automotive Standard

AEC-Q100

The 74VHC123A/221AFT are high speed CMOS MONOSTABLE MULTIVIBRATOR fabricated with silicon gate C2MOS technology. There are two trigger inputs, A input (negative edge), and B input (positive edge). These inputs are valid for a slow rise/fall time signal (tr = tf = 1 s) as they are schmitt trigger inputs. This device may also be triggered by using CLR input (positive edge).After triggering, the output stays in a MONOSTABLE state for a time period determined by the external resistor and capacitor (RX, CX). A low level at the CLR input breaks this state. Limits for CX and RX are:External capacitor, CX: No limit External resistor, RX: VCC = 2.0 V more than 5 kΩ VCC ≥ 3.0 V more than 1 kΩ

Wide operating temperature range: Topr = -40 to 125 

High speed: Propagation delay time = 8.1 ns (typ.) at VCC = 5 V

Low power dissipation:

Standby state: 4.0 μA (max) at Ta = 25 

Active state: 750 μA (max) at Ta = 25 

High noise immunity: VNIH = VNIL = 28 % VCC (min)

Power-down protection is provided on all inputs.

Balanced propagation delays: tPLH ≈ tPHL

Wide operating voltage range: VCC(opr) = 2.0 V to 5.5 V

Pin and function compatible with 74HC123,74HC221 type.

관련된 링크들