제조사부품번호

Nexperia, 1 Monostable Multivibrator 74LVC 32 mA, 8-Pin TSSOP

RS 제품 번호:: 170-4890
제조사 부품 번호:: 74LVC1G123DP,125
제조업체:: Nexperia

Nexperia, 1 Monostable Multivibrator 74LVC 32 mA, 8-Pin TSSOP

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 reel of 3000 units)*

₩1,269,000.00

일시적 품절

2026년 5월 20일 부터 3,000 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	릴당*
3000 - 3000	₩423.00	₩1,267,872.00
6000 - 9000	₩409.84	₩1,230,084.00
12000 +	₩398.56	₩1,192,860.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 170-4890
제조사 부품 번호:: 74LVC1G123DP,125
제조업체:: Nexperia

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Nexperia
	Logic Family	74LVC
	Product Type	Monostable Multivibrator
	Number of Elements per Chip	1
	Maximum High Level Output Current	-32mA
	Maximum Low Level Output Current	32mA
	Minimum Pulse Width	2.5ns
	Maximum Quiescent Current	20μA
	Minimum Supply Voltage	1.65V
	Mount Type	Surface
	Maximum Supply Voltage	5.5V
	Package Type	TSSOP
	Multivibrator Type	Monostable Multivibrator
	Minimum Operating Temperature	-40°C
	Maximum Propagation Delay Time @ CL	19ns
	Pin Count	8
	Maximum Operating Temperature	125°C
	Width	3.1 mm
	Height	0.95mm
	Series	74LVC1G123
	Length	3.1mm
	Standards/Approvals	No
	Automotive Standard	No

	모두 선택
	브랜드 Nexperia
	Logic Family 74LVC
	Product Type Monostable Multivibrator
	Number of Elements per Chip 1
	Maximum High Level Output Current -32mA
	Maximum Low Level Output Current 32mA
	Minimum Pulse Width 2.5ns
	Maximum Quiescent Current 20μA
	Minimum Supply Voltage 1.65V
	Mount Type Surface
	Maximum Supply Voltage 5.5V
	Package Type TSSOP
	Multivibrator Type Monostable Multivibrator
	Minimum Operating Temperature -40°C
	Maximum Propagation Delay Time @ CL 19ns
	Pin Count 8
	Maximum Operating Temperature 125°C
	Width 3.1 mm
	Height 0.95mm
	Series 74LVC1G123
	Length 3.1mm
	Standards/Approvals No
	Automotive Standard No

The 74LVC1G123 is a single retriggerable monostable multivibrator with Schmitt trigger inputs. Output Pulse width is controlled by three methods. The Basic Pulse is programmed by selection of an external resistor (REXT) and capacitor (CEXT). Once triggered, the Basic output Pulse width may be extended by retriggering the gated Active LOW-going edge input (A) or the Active HIGH-going edge input (B). By repeating this process, the output Pulse period (Q = HIGH) can be MADE as long as desired. Alternatively an output delay can be terminated at any time by a LOW-going edge on input CLR, which also inhibits the triggering.

Wide supply voltage range

High noise immunity

CMOS low power consumption

DC triggered from Active HIGH or Active LOW inputs

Retriggerable for very long pulses up to 100 % duty factor

Direct reset terminates output Pulse

Schmitt trigger on all inputs

Power-on-reset on outputs

Inputs accept voltages up to 5.5 V

Nexperia, 1 Monostable Multivibrator 74LVC 32 mA, 8-Pin TSSOP

관련된 링크들