제조사부품번호

Nexperia 74HC123PW-Q100,118, 2 Dual Monostable Multivibrator 74HC 5.2 mA, 16-Pin TSSOP

RS 제품 번호:: 153-2888
제조사 부품 번호:: 74HC123PW-Q100,118
제조업체:: Nexperia

Nexperia 74HC123PW-Q100,118, 2 Dual Monostable Multivibrator 74HC 5.2 mA, 16-Pin TSSOP

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

현재 비가용

RS는 이 제품을 더 이상 판매하지 않습니다.

RS 제품 번호:: 153-2888
제조사 부품 번호:: 74HC123PW-Q100,118
제조업체:: Nexperia

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Nexperia
	Product Type	Dual Monostable Multivibrator
	Logic Family	74HC
	Number of Elements per Chip	2
	Maximum High Level Output Current	-5.2mA
	Maximum Low Level Output Current	5.2mA
	Minimum Pulse Width	26ns
	Maximum Quiescent Current	160μA
	Mount Type	Surface
	Minimum Supply Voltage	2V
	Package Type	TSSOP
	Maximum Supply Voltage	6V
	Minimum Operating Temperature	-40°C
	Maximum Propagation Delay Time @ CL	80ns
	Pin Count	16
	Multivibrator Type	Monostable Multivibrator
	Maximum Operating Temperature	125°C
	Standards/Approvals	JEDEC No. 7A
	Width	4.5 mm
	Series	74HC
	Length	5.1mm
	Height	0.95mm
	Automotive Standard	AEC-Q101

	모두 선택
	브랜드 Nexperia
	Product Type Dual Monostable Multivibrator
	Logic Family 74HC
	Number of Elements per Chip 2
	Maximum High Level Output Current -5.2mA
	Maximum Low Level Output Current 5.2mA
	Minimum Pulse Width 26ns
	Maximum Quiescent Current 160μA
	Mount Type Surface
	Minimum Supply Voltage 2V
	Package Type TSSOP
	Maximum Supply Voltage 6V
	Minimum Operating Temperature -40°C
	Maximum Propagation Delay Time @ CL 80ns
	Pin Count 16
	Multivibrator Type Monostable Multivibrator
	Maximum Operating Temperature 125°C
	Standards/Approvals JEDEC No. 7A
	Width 4.5 mm
	Series 74HC
	Length 5.1mm
	Height 0.95mm
	Automotive Standard AEC-Q101

Dual retriggerable monostable multivibrator with reset, The 74HC123-Q100, 74HCT123-Q100 are high-speed Si-gate CMOS devices and are pin compatible with Low-power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC123-Q100, 74HCT123-Q100 are dual retriggerable monostable multivibrators with output Pulse width control by three methods, The Basic Pulse is defined by the selection of the external resistor (REXT) and capacitor (CEXT). Once triggered, the Basic output Pulse width may be extended by retriggering the gated Active LOW-going edge input (nA) or the Active HIGH-going edge input (nB).

Automotive product qualification in accordance with AEC-Q100 (Grade 1)

DC triggered from Active HIGH or Active LOW inputs

Retriggerable for very long pulses up to 100 % duty factor

Direct reset terminates output Pulse

Schmitt trigger action on all inputs except for the reset input

Nexperia 74HC123PW-Q100,118, 2 Dual Monostable Multivibrator 74HC 5.2 mA, 16-Pin TSSOP

관련된 링크들