제조사부품번호

Omron Monitoring Relay, 1 Phase, SPDT, DIN Rail, 240V ac

RS 제품 번호:: 111-3119
제조사 부품 번호:: K8DT-VW3CA
제조업체:: Omron

Omron Monitoring Relay, 1 Phase, SPDT, DIN Rail, 240V ac

Subtotal (1 unit)*

₩361,580.00

현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩361,580.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 111-3119
제조사 부품 번호:: K8DT-VW3CA
제조업체:: Omron

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Omron
	Product Type	Monitoring Relay
	Function	Overvoltage, Undervoltage
	Electrical Phase	1
	Contact Configuration	SPDT
	Mount Type	DIN Rail
	Power Consumption	2.5VA
	Terminal Type	Push-in
	IP Rating	IP20
	Supply AC Voltage	240V ac
	Contact Current	10A
	Minimum Operating Temperature	-20°C
	Maximum Operating Temperature	60°C
	Height	90mm
	Length	90mm
	Width	17.5mm
	Standards/Approvals	EN 60947-5-1, UL 60947-5-1, RoHS
	Series	K8DT-VW

	모두 선택
	브랜드 Omron
	Product Type Monitoring Relay
	Function Overvoltage, Undervoltage
	Electrical Phase 1
	Contact Configuration SPDT
	Mount Type DIN Rail
	Power Consumption 2.5VA
	Terminal Type Push-in
	IP Rating IP20
	Supply AC Voltage 240V ac
	Contact Current 10A
	Minimum Operating Temperature -20°C
	Maximum Operating Temperature 60°C
	Height 90mm
	Length 90mm
	Width 17.5mm
	Standards/Approvals EN 60947-5-1, UL 60947-5-1, RoHS
	Series K8DT-VW

K8DT-VW Series Datasheet

Omron K8DT-VW Series Monitoring Relay, 100to240V AC Supply Voltage, 10A Contact Current - K8DT-VW3CA

This monitoring relay is designed to detect and respond to voltage excursions within single-phase electrical systems, protecting equipment from both excess and deficient supply conditions. It operates from a wide AC supply range suitable for diverse industrial installations and mounts neatly on standard DIN rails for panel integration.

Features and Benefits:

• Detects overvoltage and undervoltage to protect connected equipment
• Operates from 100-240V AC for flexible supply compatibility
• Single-pole double-throw output for simple switching arrangements
• 10 A contact rating to handle common control and load circuits
• Push-in terminals for quicker wiring and reduced installation time
• Rated for operation between -20 and 60 °C for varied site conditions

Applications

• Suitable for motor control panels requiring voltage supervision
• Ideal for automated production lines needing supply protection
• Used with distribution boards to monitor single-phase supplies
• Can be used for HVAC control systems to prevent voltage-related faults
• Suitable for retrofitting existing control cabinets on DIN rail

What type of electrical switching does it provide?

It provides a single-pole double-throw contact configuration allowing one common changeover contact to switch between two circuits at up to 10 A.

How is the device mounted and connected in control panels?

It snaps onto a DIN rail and uses push-in terminations to secure conductors without screw tightening for Rapid installation.

What environmental range can I expect for indoor installations?

The unit is designed to function reliably across ambient temperatures from -20 °C up to 60 °C, covering typical indoor industrial environments.

Which standards relate to its Interface and safety performance?

The device conforms with recognised control-relay standards specified for low-voltage electrical switching and material restrictions.

Standards

EN60947-5-1, UL 60947-5-1, IP 20 Terminals