Omron Monitoring Relay, 1 Phase, SPDT, DIN Rail, 2mA to 500mA, 24 V dc, 240V ac

RS 제품 번호:: 111-3087
제조사 부품 번호:: K8DT-AS1CA
제조업체:: Omron

Omron Monitoring Relay, 1 Phase, SPDT, DIN Rail, 2mA to 500mA, 24 V dc, 240V ac

Subtotal (1 unit)*

₩372,520.00

6 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩372,520.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 111-3087
제조사 부품 번호:: K8DT-AS1CA
제조업체:: Omron

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Omron
	Product Type	Monitoring Relay
	Electrical Phase	1
	Contact Configuration	SPDT
	Mount Type	DIN Rail
	Minimum Current Sensed	2mA
	Maximum Current Sensed	500mA
	Power Consumption	2.5VA
	Current Sensitivity	Overcurrent, Undercurrent
	Terminal Type	Push-in
	IP Rating	IP20
	Time Delay	250 ms
	Supply DC Voltage	24 V dc
	Minimum Operating Temperature	-20°C
	Relay Contact Current	5A
	Supply AC Voltage	240V ac
	Maximum Operating Temperature	60°C
	Standards/Approvals	RoHS, UL 60947-5-1, EN 60947-5-1
	Length	90mm
	Height	90mm
	Series	K8DT-AS
	Width	17.5mm

	모두 선택
	브랜드 Omron
	Product Type Monitoring Relay
	Electrical Phase 1
	Contact Configuration SPDT
	Mount Type DIN Rail
	Minimum Current Sensed 2mA
	Maximum Current Sensed 500mA
	Power Consumption 2.5VA
	Current Sensitivity Overcurrent, Undercurrent
	Terminal Type Push-in
	IP Rating IP20
	Time Delay 250 ms
	Supply DC Voltage 24 V dc
	Minimum Operating Temperature -20°C
	Relay Contact Current 5A
	Supply AC Voltage 240V ac
	Maximum Operating Temperature 60°C
	Standards/Approvals RoHS, UL 60947-5-1, EN 60947-5-1
	Length 90mm
	Height 90mm
	Series K8DT-AS
	Width 17.5mm

English Datasheet

COO (Country of Origin):: CN

Omron K8DT-AS Series Monitoring Relay, 100 to 240V AC Supply Voltage, 5A Relay Contact Current - K8DT-AS1CA

This monitoring relay provides continuous current surveillance for single-phase systems, detecting both overcurrent and undercurrent conditions to support motor and equipment protection. It accepts universal AC supply voltages or a dedicated DC supply and is designed for DIN-rail mounting in control panels and switchgear.

Features and Benefits:

• Adjustable sensing range 2mA-500mA for precise detection
• Single-pole changeover contact rated 5A for load switching
• 250ms timing delay to prevent nuisance trips from transients
• Works from 100-240V AC or 24V DC supply for installation flexibility
• Push-in terminals for Faster wiring and secure connections
• Low power consumption 2.5VA to minimise auxiliary loading

Applications

• Suitable for protecting motors against phase-loss and stall conditions
• Ideal for integration into automated control panels on DIN rail
• Used for monitoring current in industrial pump assemblies
• Can be used for fault detection in conveyor drive systems
• Used with single-phase distribution circuits in machinery

What environmental temperatures can it operate within?

It is specified to function between -20°C and 60°C, enabling use in typical factory and plant environments.

How is the device mounted and connected in assemblies?

It clips onto a DIN rail and uses push-in terminals for direct conductor insertion without additional connectors.

What mechanical protection does the enclosure provide?

The unit has IP20 ingress protection, suitable for enclosed panels but not for direct exposure to liquids.

What standards approvals does it meet for electrical safety?

It complies with EN 60947-5-1 and UL 60947-5-1 and meets RoHS requirements.

How many electrical phases does it monitor and what contact configuration is provided?

It monitors a single electrical phase and provides an SPDT contact arrangement for signalling or control.

Note

K8DT-AS allow use in either overcurrent or undercurrent mode.
K8DT-AW allow overcurrent and undercurrent monitoring simultaneously

Standards

EN 60947-5-1, UL 60947-5-1, IP 20 Terminals