제조사부품번호

Omron Monitoring Relay, 1 Phase, SPST, DIN Rail, 0.1A to 5A, 240V ac

RS 제품 번호:: 111-3105
제조사 부품 번호:: K8DT-AW2TA
제조업체:: Omron

Omron Monitoring Relay, 1 Phase, SPST, DIN Rail, 0.1A to 5A, 240V ac

Subtotal (1 unit)*

₩398,600.00

일시적 품절

2026년 10월 19일 부터 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩398,600.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 111-3105
제조사 부품 번호:: K8DT-AW2TA
제조업체:: Omron

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Omron
	Product Type	Monitoring Relay
	Electrical Phase	1
	Contact Configuration	SPST
	Mount Type	DIN Rail
	Minimum Current Sensed	0.1A
	Maximum Current Sensed	5A
	Power Consumption	2.5VA
	Current Sensitivity	Overcurrent, Undercurrent
	Terminal Type	Push-in
	IP Rating	IP20
	Time Delay	250 ms
	Minimum Operating Temperature	-20°C
	Supply AC Voltage	240V ac
	Relay Contact Current	0.1, 5mA
	Maximum Operating Temperature	60°C
	Height	90mm
	Width	17.5mm
	Standards/Approvals	EN 60947-5-1, UL 60947-5-1, RoHS
	Series	K8DT-AW
	Length	90mm

	모두 선택
	브랜드 Omron
	Product Type Monitoring Relay
	Electrical Phase 1
	Contact Configuration SPST
	Mount Type DIN Rail
	Minimum Current Sensed 0.1A
	Maximum Current Sensed 5A
	Power Consumption 2.5VA
	Current Sensitivity Overcurrent, Undercurrent
	Terminal Type Push-in
	IP Rating IP20
	Time Delay 250 ms
	Minimum Operating Temperature -20°C
	Supply AC Voltage 240V ac
	Relay Contact Current 0.1, 5mA
	Maximum Operating Temperature 60°C
	Height 90mm
	Width 17.5mm
	Standards/Approvals EN 60947-5-1, UL 60947-5-1, RoHS
	Series K8DT-AW
	Length 90mm

English Datasheet

COO (Country of Origin):: CN

Omron K8DT-AW Series Monitoring Relay, 100 to 240V AC Supply Voltage, 0.1A to 5A Sensing Range - K8DT-AW2TA

This monitoring relay monitors single-phase current and signals overcurrent and undercurrent conditions within industrial control panels. It is designed for DIN-rail mounting in automation and electrical installations and operates from a wide AC supply range suited to varied mains environments.

Features and Benefits:

• Detects currents from 0.1A to 5A for precise protection and sensing
• Adjustable response to both overcurrent and undercurrent for flexible monitoring
• Single pole single throw contact provides a clear switching action
• Push-in terminals enable quick wiring and reduced installation time
• 250ms time delay prevents nuisance tripping from short transients
• Low power draw of 2.5VA minimises load on control supply

Applications

• Suitable for motor protection against stall and low-load conditions
• Ideal for monitoring current in single-phase distribution circuits
• Used with contactors to provide upstream current supervision
• Can be used for load-loss detection in heating and pump systems

What environmental temperature range can it operate within?

It functions reliably between -20°C and 60°C, allowing use in many plant and equipment rooms.

How is the device protected against ingress and where is it intended to be mounted?

The unit has an IP20 rating and is intended for installation on a DIN rail inside control enclosures.

Which standards cover its design and safety characteristics?

It is manufactured to meet EN 60947-5-1 and UL 60947-5-1 requirements and conforms to RoHS restrictions.

What are the Terminal and switching current specifics?

Connections use push-in terminals and the relay contact switching capability includes small sensing currents from 0.1mA up to 5mA.

Note

K8DT-AS allow use in either overcurrent or undercurrent mode.
K8DT-AW allow overcurrent and undercurrent monitoring simultaneously

Standards

EN 60947-5-1, UL 60947-5-1, IP 20 Terminals