Omron Monitoring Relay, 1 Phase, SPDT, DIN Rail, 0.1A to 5A, 0V ac

RS 제품 번호:: 111-3103
제조사 부품 번호:: K8DT-AW2CA
제조업체:: Omron

Omron Monitoring Relay, 1 Phase, SPDT, DIN Rail, 0.1A to 5A, 0V ac

Subtotal (1 unit)*

₩401,407.50

1 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩401,407.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 111-3103
제조사 부품 번호:: K8DT-AW2CA
제조업체:: Omron

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Omron
	Product Type	Monitoring Relay
	Electrical Phase	1
	Contact Configuration	SPDT
	Mount Type	DIN Rail
	Minimum Current Sensed	0.1A
	Maximum Current Sensed	5A
	Power Consumption	2.5VA
	Current Sensitivity	Undercurrent, Overcurrent
	Terminal Type	Push-in
	Time Delay	250 ms
	IP Rating	IP20
	Supply AC Voltage	0V ac
	Minimum Operating Temperature	-20°C
	Relay Contact Current	0.1, 5mA
	Maximum Operating Temperature	60°C
	Width	17.5mm
	Length	90mm
	Series	K8DT-AW
	Height	90mm
	Standards/Approvals	RoHS, UL 60947-5-1, EN 60947-5-1

	모두 선택
	브랜드 Omron
	Product Type Monitoring Relay
	Electrical Phase 1
	Contact Configuration SPDT
	Mount Type DIN Rail
	Minimum Current Sensed 0.1A
	Maximum Current Sensed 5A
	Power Consumption 2.5VA
	Current Sensitivity Undercurrent, Overcurrent
	Terminal Type Push-in
	Time Delay 250 ms
	IP Rating IP20
	Supply AC Voltage 0V ac
	Minimum Operating Temperature -20°C
	Relay Contact Current 0.1, 5mA
	Maximum Operating Temperature 60°C
	Width 17.5mm
	Length 90mm
	Series K8DT-AW
	Height 90mm
	Standards/Approvals RoHS, UL 60947-5-1, EN 60947-5-1

English Datasheet

COO (Country of Origin):: CN

Omron K8DT-AW Series Monitoring Relay, 100 to 240V Supply AC Voltage, 0.1A Minimum Current Sensed - K8DT-AW2CA

This monitoring relay provides electrical phase monitoring and current sensing for single-phase control systems, protecting equipment by detecting both undercurrent and overcurrent conditions. It accepts a wide supply range and is designed for DIN-rail mounting in industrial control panels, offering a Compact footprint for space-constrained installations.

Features and Benefits:

• Detects 0.1A to 5A ranges to protect motor loads • SPDT contact offers simple changeover switching capability • 100-240V supply supports flexible power sources • 250ms time delay prevents nuisance tripping during transients • Push-in terminals enable Rapid wiring and serviceability • Power consumption 2.5VA minimises panel loading

Applications

• Suitable for monitoring motor supply current in conveyor systems • Ideal for detecting phase-related faults in pump control cabinets • Used with manufacturing machinery for load-loss detection • Can be used for preventative alarm signalling in HVAC panels

What contact switching currents can I expect for control signalling?

The relay provides switching capability at very low currents for signalling, specified down to 0.1mA and up to 5mA for relay contact current.

How does the device cope with temperature variations in plant rooms?

It is rated to operate between -20°C and 60°C, allowing use across typical industrial temperature ranges.

What mounting and enclosure protection does it require?

It is intended for DIN-rail mounting and has an IP20 rating, so it should be installed within an appropriate control enclosure to ensure ingress protection.

Which standards govern its safety and environmental compliance?

It conforms to RoHS and meets UL 60947-5-1 and EN 60947-5-1 requirements for control-device performance.

How large is the unit for panel planning?

The relay occupies a slim profile of 17.5mm width and a Compact overall size of 90x17.5x90mm for dense cabinet layouts.

Note

K8DT-AS allow use in either overcurrent or undercurrent mode.
K8DT-AW allow overcurrent and undercurrent monitoring simultaneously

Standards

EN 60947-5-1, UL 60947-5-1, IP 20 Terminals