제조사부품번호

Dold Monitoring Relay, 3 Phase, 2 NO/1 NC, DIN Rail, 24 V dc, 250 V ac

RS 제품 번호:: 427-653
제조사 부품 번호:: UG6946.02PS 20-400mV 0,2-6s UH=DC24V
제조업체:: Dold

Dold Monitoring Relay, 3 Phase, 2 NO/1 NC, DIN Rail, 24 V dc, 250 V ac

Subtotal (1 unit)*

₩931,686.64

재고있음

1 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩931,686.64

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 427-653
제조사 부품 번호:: UG6946.02PS 20-400mV 0,2-6s UH=DC24V
제조업체:: Dold

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Dold
	Product Type	Monitoring Relay
	Electrical Phase	3
	Contact Configuration	2 NO/1 NC
	Mount Type	DIN Rail
	Power Consumption	3W
	Time Delay	0.2 to 6 s
	IP Rating	IP20, IP40
	Minimum Operating Temperature	-25°C
	Relay Contact Current	52 A
	Supply AC Voltage	250 V ac
	Supply DC Voltage	24 V dc
	Maximum Operating Temperature	60°C
	Standards/Approvals	EN IEC 62061, EN 61508, EN 61511 and EN 61800-5-2, EN ISO 13849-1
	Height	110mm
	Length	120.3mm
	Width	22.5 mm
	Series	UG6946

	모두 선택
	브랜드 Dold
	Product Type Monitoring Relay
	Electrical Phase 3
	Contact Configuration 2 NO/1 NC
	Mount Type DIN Rail
	Power Consumption 3W
	Time Delay 0.2 to 6 s
	IP Rating IP20, IP40
	Minimum Operating Temperature -25°C
	Relay Contact Current 52 A
	Supply AC Voltage 250 V ac
	Supply DC Voltage 24 V dc
	Maximum Operating Temperature 60°C
	Standards/Approvals EN IEC 62061, EN 61508, EN 61511 and EN 61800-5-2, EN ISO 13849-1
	Height 110mm
	Length 120.3mm
	Width 22.5 mm
	Series UG6946

Datasheet - UG6946.02PS 20-400mV 0,2-6s UH=DC24V

COO (Country of Origin):: DE

The Dold safe sensor less standstill monitor is suitable for detects the standstill of 3-phase and 1-phase electric motors independent of the direction of rotation. This means sensors such as encoders or proximity switches are not required. The standstill monitor measures the induced voltage of the coasting motor. If the induced voltage approaches 0, this means motor standstill for the device and the output relay is activated. With a width of only 22.5 mm, the UG 6946 can be accommodated in the control panel even under tight space conditions allowing easy retrofitting. For the implementation of different operating modes, the standstill monitor also offers the possibility of bridging the standstill monitoring muting.

Nominal voltage DC

Thermal current Ith maximum 5 A

1/2-channel 2

Measuring motor voltage maximum690 V

Dold Monitoring Relay, 3 Phase, 2 NO/1 NC, DIN Rail, 24 V dc, 250 V ac

관련된 링크들