Crouzet Phase, Voltage Monitoring Relay, 3 Phase, SPDT, 183 → 528V ac, DIN Rail
- RS 제품 번호:
- 261-915
- 제조사 부품 번호:
- 84873022
- 제조업체:
- Crouzet
Subtotal (1 unit)*
₩178,524.80
재고있음
- 추가로 2025년 12월 15일 부터 15 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩178,524.80 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 261-915
- 제조사 부품 번호:
- 84873022
- 제조업체:
- Crouzet
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Crouzet | |
| Monitoring Application | Phase, Voltage | |
| Electrical Phase | 3 | |
| Voltage Sensing Range | 183 → 528V ac | |
| Contact Configuration | SPDT | |
| Voltage Sensitivity | Overvoltage, Undervoltage | |
| Mounting Type | DIN Rail | |
| Phase Sensitivity | Phase Asymmetry, Phase Failure, Phase Sequence | |
| Time Delay | 0.1 → 10s | |
| Series | MWG | |
| Maximum Operating Temperature | +50°C | |
| Maximum Voltage Sensed | 528V ac | |
| Height | 92.6mm | |
| Length | 69mm | |
| Width | 17.5mm | |
| Dimensions | 69 x 17.5 x 92.6mm | |
| Minimum Operating Temperature | -20°C | |
| Operating Temperature Range | +50°C | |
| Minimum Voltage Sensed | 183V ac | |
| 모두 선택 | ||
|---|---|---|
브랜드 Crouzet | ||
Monitoring Application Phase, Voltage | ||
Electrical Phase 3 | ||
Voltage Sensing Range 183 → 528V ac | ||
Contact Configuration SPDT | ||
Voltage Sensitivity Overvoltage, Undervoltage | ||
Mounting Type DIN Rail | ||
Phase Sensitivity Phase Asymmetry, Phase Failure, Phase Sequence | ||
Time Delay 0.1 → 10s | ||
Series MWG | ||
Maximum Operating Temperature +50°C | ||
Maximum Voltage Sensed 528V ac | ||
Height 92.6mm | ||
Length 69mm | ||
Width 17.5mm | ||
Dimensions 69 x 17.5 x 92.6mm | ||
Minimum Operating Temperature -20°C | ||
Operating Temperature Range +50°C | ||
Minimum Voltage Sensed 183V ac | ||
- COO (Country of Origin):
- ID
Multi Function Phase Control Relays 17.5mm - C-Lynx
3 phase network control relays monitor: the correct sequence of phases L1, L2, L3, the total phase failure - Undervoltage and overvoltage from 2% to 20% of Under Voltage Relay and Asymmetry rate from 5% to 15% of Under Voltage Relay. LEDs are used for fault signalling, if a fault persists for longer than the threshold crossing delay configured by the operator, the output relay opens and the LED R is extinguished.
"Control of 3 phase networks: phase sequence, phase failure, imbalance (asymmetry), over and under voltage
Range includes mono-function product and multi function product
Multi-voltage from 3 x 208 to 3 x 480 V
True RMS measurement
LED status indication"
Range includes mono-function product and multi function product
Multi-voltage from 3 x 208 to 3 x 480 V
True RMS measurement
LED status indication"