RS PRO Epoxy Mixer Nozzle, 50 ml Bayonet, 20 Elements, 151 mm

모든 Mixer Nozzles 열람하기
대량 구매 할인 기용 가능
View bulk pricing options

Subtotal (1 pack of 10 units)*

₩16,260.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 10월 05일 부터 10 개 단위 배송
  • 추가로 2026년 10월 05일 부터 22,950 개 단위 배송
  • 추가로 2026년 10월 08일 부터 2,500 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량
한팩당
한팩당*
10 - 40₩1,626.00₩16,260.00
50 - 240₩1,592.00₩15,920.00
250 +₩1,312.00₩13,120.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
503-385
제조업체:
RS PRO
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

RS PRO

Product Type

Mixer Nozzle

Supported Adhesive Type

Epoxy

Supported Cartridge Size

50ml

Supported Cartridge Type

Bayonet

Number of Mixing Elements

20

Length

151mm

Standards/Approvals

No

제외

RS PRO Epoxy Mixer Nozzle


Introducing the high-quality static mixing nozzle from RS PRO for use with structural adhesive cartridge systems in adhesive dispensing guns (also known as caulking guns). This static mixing nozzle is designed with a helical mixing baffle, which ensures full mixing and a smooth even sealant application. The epoxy mixing nozzle has a bell inlet, which fits large volume cartridges that port the two different materials directly into the mixer. Easy to clean by removing the mixer and wiping the manifold. The end of the nozzle can be cut back to increase the bead size of the epoxy applied and the nozzle is constructed from a high-grade, industrial-safe and silicone free polypropylene.

Features and Benefits:


• Supports epoxy, acrylic and methacrylate, adhesives & sealants

• Round mixer profile providing smooth even application

• Bayonet fitting

• Easy to use and can be cut to alter bead size

• Easy to clean

• Designed for 50 ml cartridges of epoxy adhesives

Typical Applications:


RS PRO mixer nozzles are used by professionals and DIY enthusiasts for a smooth and even application to seal or gap fill with adhesive dispensers such caulking guns. Can be used in many jobs from bathrooms to kitchens.

FAQs:


Does longer nozzle ensure better mixing of components?

No, every nozzle is designed in an optimal way to ensure correct components mixing. The length of a nozzle always depends on the size of the cartridge. Simply, for the bigger cartridge, a longer nozzle is required. Please, always read epoxy manufacturers recommendations before selecting the correct size of the nozzle to make sure your fluids or liquids are optimally combined.

Can this static mixer nozzle be used more than once?

Yes, nozzles can be washed and re-used as many times as it's needed. However, it is recommended to use carefully cleaned mixer nozzles to make sure liquids or fluids are properly mixed together. Before re-using a nozzle please, make sure it's been cleaned properly and the syringe plunger is not blocked by any obstacles.

관련된 링크들