제조사부품번호

RS PRO RF Field Emission Detector

RS 제품 번호:: 106-5307
Distrelec 제품 번호:: 304-03-807
제조업체:: RS PRO

Subtotal (1 unit)*

₩210,460.00

53 개 단위 배송 준비 완료
추가로 2026년 12월 30일 부터 100 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩210,460.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 106-5307
Distrelec 제품 번호:: 304-03-807
제조업체:: RS PRO

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	RS PRO
	Product Type	Emission Detector
	Radiation Type	RF Field
	Accuracy	±1 dB
	Units Measured	μA/m, μW/cm2, μW/m2, mA/m, mV/m, V/m, mW/m2
	Power Source	Battery
	Battery Life	15h
	Minimum Operating Temperature	0°C
	Maximum Frequency	3.5GHz
	Width	60mm
	Standards/Approvals	No
	Maximum Operating Temperature	50°C
	Weight	200g
	Length	60mm
	Height	195mm
	Minimum Frequency	50MHz

	모두 선택
	브랜드 RS PRO
	Product Type Emission Detector
	Radiation Type RF Field
	Accuracy ±1 dB
	Units Measured μA/m, μW/cm2, μW/m2, mA/m, mV/m, V/m, mW/m2
	Power Source Battery
	Battery Life 15h
	Minimum Operating Temperature 0°C
	Maximum Frequency 3.5GHz
	Width 60mm
	Standards/Approvals No
	Maximum Operating Temperature 50°C
	Weight 200g
	Length 60mm
	Height 195mm
	Minimum Frequency 50MHz

COO (Country of Origin):: TW

RS PRO Three Axis RF Field Strength Meter IM-195

RS PRO three axis RF field strength meter IM-195 is a great value instrument designed for measuring and monitoring Radio Frequency (RF) electromagnetic field strength. It is capable of measuring frequency range 50 MHz to 3.5 GHz with triple axis X, Y and Z isotropic sensors. It has many great features including being able to record 200 measurements, low battery and over load indication and an easy to read LCD display which presents the information in a clear way making this device an easy to use instrument.

Nowadays radio frequency (RF) and microwave fields can be found all over and are produced by cordless phones and communications, mobile phone masts, Wi-Fi, microwave ovens plus several other popular devices. The IM-195 is an easy and safe device to use in order to measure RF electromagnetic field strength wherever there is a voltage or a current, electric and magnetic field arise.

Features and Benefits:

RF range 38 mV to 20 V/M

Frequency range 50 MHz to 3.5 GHz

Sensors triple axis (X, Y, Z)

Manual data memory (Max & AVG) records

Calibration factor, Alarm and Clock settings

LCD display 4-1/2 digits maximum reading 19999

Measurement method digital, triaxial measurement

Directional characteristic Isotropic, triaxial

One continuous measurement range selection

Display resolution 0.1 mV/m, 0.1 μA/m, 0.001 μW/m², 0.001 μW/cm²

Setting time typically 1.5 s (0 to 90% measurement value)

Sample rate 2.5 times per second

Audible alarm, buzzer

Units mV/m, V/m, μA/m, mA/m, μW/m², mW/m², μW/cm²

Display value instantaneous measured value, maximum value, average value or maximum average value

Alarm function, adjustable threshold with ON / OFF

Calibration factor CAL: adjustable

Manual data memory and read storage 200 data sets

Auto power off, default time 15 minutes

Operating temperature range 0°C to + 50°C

Operating humidity range 25% to 75% RH

Dimensions 60 x 60 x195 mm

Weight approximately 200 g (including battery)

Battery - 9V

Typical Applications

This microwave and emissions meter can be used to indicate electromagnetic pollution which is generated by various things including wireless internet, microwave ovens, mobile phone tower antennas etc. The RS PRO IM-195 detector can be used for the following:

RF power measurement for transmitters

High frequency (RF) electromagnetic wave field strength measurement

Mobile phone base station antenna radiation power density measurement

Spy camera, wireless bug finder

Wireless communication

Wi-Fi detection, installation

Cellular/ cordless phone radiation safety level

Microwave oven leakage detection

Personal living environment EMF safety

Note

Not suitable for any safety-related applications

Supplied with

9 V battery, carrying case, user manual