PUI Audio Microphone MEMS, 20 kHz
- RS 제품 번호:
- 287-732P
- 제조사 부품 번호:
- DMM-4026-B-I2S-R
- 제조업체:
- PUI Audio
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
View bulk pricing optionsSubtotal 20 units (supplied on a continuous strip)*
₩73,905.00
재고있음
- 추가로 2026년 6월 15일 부터 1,210 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 20 - 198 | ₩3,695.25 |
| 200 - 998 | ₩3,402.75 |
| 1000 - 1998 | ₩3,159.00 |
| 2000 + | ₩2,564.25 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 287-732P
- 제조사 부품 번호:
- DMM-4026-B-I2S-R
- 제조업체:
- PUI Audio
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | PUI Audio | |
| Sub Type | MEMS | |
| Product Type | Microphone | |
| Directionality/Polar Pattern | Omni Directional | |
| Maximum Operating Voltage | 3.6V | |
| Sensitivity | -26dB | |
| Length | 4mm | |
| Maximum Frequency Response | 20kHz | |
| Standards/Approvals | REACH, RoHS | |
| Minimum Frequency Response | 0.02kHz | |
| Minimum Operating Voltage | 1.5V | |
| 모두 선택 | ||
|---|---|---|
브랜드 PUI Audio | ||
Sub Type MEMS | ||
Product Type Microphone | ||
Directionality/Polar Pattern Omni Directional | ||
Maximum Operating Voltage 3.6V | ||
Sensitivity -26dB | ||
Length 4mm | ||
Maximum Frequency Response 20kHz | ||
Standards/Approvals REACH, RoHS | ||
Minimum Frequency Response 0.02kHz | ||
Minimum Operating Voltage 1.5V | ||
PUI Audio Microphone, 20kHz Maximum Frequency Response, -26dB Sensitivity - DMM-4026-B-I2S-R
This omnidirectional MEMS microphone is designed for low-voltage digital audio capture in industrial and electronic systems. It converts acoustic signals into an I2S output suitable for integration with digital processors and control units, offering broad frequency coverage for voice and environmental sensing in automation and machine‑interface contexts.
Features and Benefits:
• Omnidirectional pickup for uniform sound capture across angles
• Frequency response of 0.02 to 20 kHz for wideband audio detection
• Sensitivity -26 dB enabling detection of low‑level signals
• Operates from 1.5V to 3.6V for low‑voltage system compatibility
• Pin‑type connector for straightforward board‑level connection
• REACH and RoHS conformity supporting regulatory material limits
• Frequency response of 0.02 to 20 kHz for wideband audio detection
• Sensitivity -26 dB enabling detection of low‑level signals
• Operates from 1.5V to 3.6V for low‑voltage system compatibility
• Pin‑type connector for straightforward board‑level connection
• REACH and RoHS conformity supporting regulatory material limits
Applications
• Suitable for voice detection in machinery safety systems
• Ideal for acoustic monitoring in environmental control units
• Used with embedded controllers for hands‑free interfaces
• Can be used for sound‑based diagnostics in electromechanical equipment
• Ideal for acoustic monitoring in environmental control units
• Used with embedded controllers for hands‑free interfaces
• Can be used for sound‑based diagnostics in electromechanical equipment
What electrical supply range is required for reliable operation?
It accepts a supply between 1.5V and 3.6 V, allowing use with common low‑voltage logic rails and battery‑powered electronics.
How does the microphone perform across the audible spectrum?
The device responds from 0.02 kHz up to 20 kHz, covering subsonic monitoring through the full audible range for voice and machine‑noise analysis.
What connector type should I expect for PCB integration?
It employs a pin‑type connector, compatible with soldering or pin‑header mounting on PCB layouts.
Is the device suitable for applications demanding material‑restriction compliance?
The microphone meets REACH and RoHS requirements, indicating it conforms to the specified substance restrictions.