PUI Audio Microphone MEMS, 18 kHz

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Microphones 열람하기
대량 구매 할인 기용 가능
View bulk pricing options

Subtotal 20 units (supplied on a continuous strip)*

₩78,000.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 1,244 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량
한팩당
20 - 198₩3,900.00
200 - 998₩3,600.00
1000 - 1998₩3,330.00
2000 +₩2,710.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

포장 옵션
RS 제품 번호:
287-731P
제조사 부품 번호:
DMM-3526-B-R
제조업체:
PUI Audio
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

PUI Audio

Sub Type

MEMS

Product Type

Microphone

Directionality/Polar Pattern

Omni Directional

Maximum Operating Voltage

3.6V

Length

3.5mm

Standards/Approvals

REACH, RoHS

Maximum Frequency Response

18kHz

Minimum Frequency Response

0.02kHz

Minimum Operating Voltage

1.64V

PUI Audio Microphone, -26db Sensitivity, 0.02kHz Minimum Frequency Response - DMM-3526-B-R


This microphone is a Compact MEMS device designed to capture sound with uniform sensitivity from all directions in electronic and automation systems. It operates at low supply voltages and is intended for integration where space is limited and omnidirectional pickup is required. The unit connects via a pin-type Interface and is suitable for incorporation into sensor modules and embedded audio stages.

Features and Benefits:


• Omnidirectional polar response for consistent ambient pick‑up
• Frequency range from 0.02 kHz to 18 kHz for wideband sensing
• Sensitivity of -26 dB for clear signal detection
• Operates between 1.64V and 3.6V for low‑voltage designs
• Pin‑type connector compatible with standard board mounting
• Compact 3.5mm form factor for space‑constrained layouts

Applications


• Suitable for voice capture in IoT sensor nodes
• Ideal for environmental sound monitoring in automation
• Used with industrial control panels requiring omnidirectional audio
• Can be used for acoustic diagnostics in mechanical systems
• Suitable for integration into consumer electronics prototypes

What electrical supply range does it support for battery‑powered designs?


It functions across a low‑voltage window from 1.64V up to 3.6 V, enabling use with common single‑cell and regulated supplies.

How does the element perform across audio frequencies relevant to human speech?


The microphone responds from 20 Hz through 18 kHz (notated as 0.02 kHz to 18 kHz), covering sub‑bass to upper treble required for intelligible speech and many acoustic diagnostics.

What form of connection should I design for on the PCB?


The device uses a pin‑type connector interface, so provide corresponding through‑hole or header footprints to accommodate pin mating.

Are there regulatory material restrictions to consider during selection?


The component complies with REACH and RoHS standards, indicating conformity with common material restriction regimes.

관련된 링크들