Microchip PIC18F8722-I/PT, 8bit PIC Microcontroller, PIC18F, 40MHz, 1.024 kB, 128 kB Flash, 80-Pin TQFP

대량 구매 할인 기용 가능

Subtotal 30 units (supplied in a tray)*

₩736,527.60

Add to Basket
수량 선택 또는 입력
재고있음
  • 104 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
30 - 59₩24,550.92
60 +₩24,060.24

* 참고 가격: 실제 구매가격과 다를 수 있습니다

포장 옵션
RS 제품 번호:
754-5516P
제조사 부품 번호:
PIC18F8722-I/PT
제조업체:
Microchip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Microchip

Family Name

PIC18F

Package Type

TQFP

Mounting Type

Surface Mount

Pin Count

80

Device Core

PIC

Data Bus Width

8bit

Program Memory Size

1.024 kB, 128 kB

Maximum Frequency

40MHz

RAM Size

3.936 kB

USB Channels

0

Number of PWM Units

5

Number of SPI Channels

2

Number of UART Channels

0

Typical Operating Supply Voltage

4.2 → 5.5 V

Number of CAN Channels

0

Number of USART Channels

2

Number of I2C Channels

2

Height

1.05mm

Number of LIN Channels

0

Number of Ethernet Channels

0

Number of PCI Channels

0

Program Memory Type

Flash

Minimum Operating Temperature

-40 °C

Instruction Set Architecture

RISC

Maximum Number of Ethernet Channels

0

ADCs

16 x 10 bit

Length

12mm

Width

12mm

Dimensions

12 x 12 x 1.05mm

Pulse Width Modulation

2(CCP), 3(ECCP)

Maximum Operating Temperature

+85 °C

Number of ADC Units

1

COO (Country of Origin):
TH

PIC18F8527/8622/8627/8722 8-Bit Microcontrollers


The PIC18F Microcontrollers from Microchip are the most capable 8-bit devices within Microchip’s offer. Available within the range is CAN, LIN and Ethernet capability as part of a comprehensive range of peripherals to meet the needs of embedded applications and versions featuring XLP (Extreme Low-Power) Technology for where power consumption is a key consideration.

The Microchip PIC18F8527/8622/8627/8722 family of Microcontrollers are 8-bit devices based upon Microchip’s PIC18 architecture and includes XLP (eXtreme Low Power) technology.

Microcontroller Features


C Compiler Optimized Architecture

Self-Programmable under Software Control

Priority Levels for Interrupts

8 x 8 Single-Cycle Hardware Multiplier

In-Circuit Serial Programming™ (ICSP™) via Two Pins

In-Circuit Debug (ICD) via Two Pins

Wide Operating Voltage Range: 2.0V to 5.5V

Programmable Brown-out Reset (BOR) with Software Enable Option

Extended Watchdog Timer (WDT)

Flexible Oscillator Structure

Power Management Features


Run: CPU On, Peripherals On

Idle: CPU Off, Peripherals On

Sleep: CPU Off, Peripherals Off

Ultra Low 50 nA Input Leakage

Run mode Currents Down to 25 μA Typical

Idle mode Currents Down to 6.8 μA Typical

Sleep mode Current Down to 120 nA Typical

Timer1 Oscillator: 900 nA, 32 kHz, 2V

Watchdog Timer: 1.6 μA, 2V Typical

Two-Speed Oscillator Start-up

Peripheral Features


High-Current Sink/Source 25 mA/25 mA

Three Programmable External Interrupts

Four Input Change Interrupts

Three Enhanced Capture/Compare/PWM (ECCP) modules

Two Capture/Compare/PWM (CCP) modules

Master Synchronous Serial Port (MSSP) module - supports 3-Wire SPI (all 4 modes) and I2C™

Enhanced Addressable USART module block (no external crystal required)

10-Bit Analogue-to-Digital Converter – 12 or 16 channels depending on model

Dual Analogue Comparators with Input Multiplexing

Programmable 16-Level High/Low-Voltage Detection (HLVD) module