STMicroelectronics, 32bit ARM Cortex M4, STM32L4+ Microcontroller, 120MHz, 2 MB Flash, 100-Pin LQFP
- RS 제품 번호:
- 175-0743P
- 제조사 부품 번호:
- STM32L4R5VGT6
- 제조업체:
- STMicroelectronics
Subtotal 1 unit (supplied in a tray)*
₩19,646.00
일시적 품절
- 2026년 3월 24일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩19,646.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 175-0743P
- 제조사 부품 번호:
- STM32L4R5VGT6
- 제조업체:
- STMicroelectronics
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | STMicroelectronics | |
| Family Name | STM32L4+ | |
| Package Type | LQFP | |
| Mounting Type | Surface Mount | |
| Pin Count | 100 | |
| Device Core | ARM Cortex M4 | |
| Data Bus Width | 32bit | |
| Program Memory Size | 2 MB | |
| Maximum Frequency | 120MHz | |
| RAM Size | 640 kB | |
| USB Channels | 1 | |
| Number of PWM Units | 2 x 16 bit | |
| Number of SPI Channels | 3 | |
| Typical Operating Supply Voltage | 3.6 (Maximum) V | |
| Number of USART Channels | 3 | |
| Number of UART Channels | 6 | |
| Number of I2C Channels | 4 | |
| Number of CAN Channels | 1 | |
| Pulse Width Modulation | 2 (6 x 16 bit) | |
| Dimensions | 14.2 x 14.2 x 1.45mm | |
| Instruction Set Architecture | DSP, RISC | |
| Minimum Operating Temperature | -40 °C | |
| Width | 14.2mm | |
| Maximum Operating Temperature | +85 °C | |
| Length | 14.2mm | |
| Program Memory Type | Flash | |
| Number of ADC Units | 1 | |
| Height | 1.45mm | |
| ADCs | 16 x 12 bit | |
| 모두 선택 | ||
|---|---|---|
브랜드 STMicroelectronics | ||
Family Name STM32L4+ | ||
Package Type LQFP | ||
Mounting Type Surface Mount | ||
Pin Count 100 | ||
Device Core ARM Cortex M4 | ||
Data Bus Width 32bit | ||
Program Memory Size 2 MB | ||
Maximum Frequency 120MHz | ||
RAM Size 640 kB | ||
USB Channels 1 | ||
Number of PWM Units 2 x 16 bit | ||
Number of SPI Channels 3 | ||
Typical Operating Supply Voltage 3.6 (Maximum) V | ||
Number of USART Channels 3 | ||
Number of UART Channels 6 | ||
Number of I2C Channels 4 | ||
Number of CAN Channels 1 | ||
Pulse Width Modulation 2 (6 x 16 bit) | ||
Dimensions 14.2 x 14.2 x 1.45mm | ||
Instruction Set Architecture DSP, RISC | ||
Minimum Operating Temperature -40 °C | ||
Width 14.2mm | ||
Maximum Operating Temperature +85 °C | ||
Length 14.2mm | ||
Program Memory Type Flash | ||
Number of ADC Units 1 | ||
Height 1.45mm | ||
ADCs 16 x 12 bit | ||
- COO (Country of Origin):
- PH
STMicroelectronics Microcontroller
The STMicroelectronics STM32L4 family type, LQFP package, surface mount, 100-pin 32-bit arm cortex-M4 core microcontroller. It has a voltage rating of 3.6V. This operates at a maximum speed of 120MHz and features 2Mb ISP flash program memory and 640kb of SRAM. It has features a floating-point unit (FPU) which supports arm double-precision and single-precision data-processing instructions and data types. This device supports a full set of DSP instructions and a memory protection unit (MPU) to enhance application security.
Features and Benefits
• 14-channel DMA controller
• 83 of I/O pins
• Advanced graphics features such as Chrom-ART Accelerator™ and Chrom-GRC™
• Batch acquisition mode (BAM) and brownout reset
• CAN (2.0B Active) and SDMMC interface
• Internal 48MHz with clock recovery
• It has an 8-bit to 14-bit camera interface
• LCD-TFT controller
• On-chip power-on-reset (POR), voltage detector (LVD) and key interrupt function (KIF)
• One 12-bit ADC 5 Msps, up to 16 bit with hardware oversampling
• One operational amplifier with built-in PGA
• Operating temperature ranges between -40°C and 85°C
• RTC with HW calendar, alarms and calibration
• Serial interfaces- CAN, UART, I2C, LIN, CSIs and SPI
• Serial wire debug supported
• True random number generator (RNG)
• Two 12-bit DAC, low-power sample and hold
• Two 16-bit advanced motor control timers
• Two 16-bit timers
• Two 32-bit timer
• Up to 21 capacitive sensing channels- support touch key, linear and rotary touch sensors
• 83 of I/O pins
• Advanced graphics features such as Chrom-ART Accelerator™ and Chrom-GRC™
• Batch acquisition mode (BAM) and brownout reset
• CAN (2.0B Active) and SDMMC interface
• Internal 48MHz with clock recovery
• It has an 8-bit to 14-bit camera interface
• LCD-TFT controller
• On-chip power-on-reset (POR), voltage detector (LVD) and key interrupt function (KIF)
• One 12-bit ADC 5 Msps, up to 16 bit with hardware oversampling
• One operational amplifier with built-in PGA
• Operating temperature ranges between -40°C and 85°C
• RTC with HW calendar, alarms and calibration
• Serial interfaces- CAN, UART, I2C, LIN, CSIs and SPI
• Serial wire debug supported
• True random number generator (RNG)
• Two 12-bit DAC, low-power sample and hold
• Two 16-bit advanced motor control timers
• Two 16-bit timers
• Two 32-bit timer
• Up to 21 capacitive sensing channels- support touch key, linear and rotary touch sensors
Applications
• Electronic equipments
• Low power appliances
• Temperature sensors
• Low power appliances
• Temperature sensors