Microchip ATSAM3S4BA-AU, 32 bit ARM Cortex M3, Atmega Microcontroller, 20 MHz, 256kB FLASH, 64-Pin LQFP
- RS 제품 번호:
- 131-0384
- 제조사 부품 번호:
- ATSAM3S4BA-AU
- 제조업체:
- Microchip
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
현재 비가용
RS는 이 제품을 더 이상 판매하지 않습니다.
- RS 제품 번호:
- 131-0384
- 제조사 부품 번호:
- ATSAM3S4BA-AU
- 제조업체:
- Microchip
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Microchip | |
| Product Type | Microcontroller | |
| Series | Atmega | |
| Package Type | LQFP | |
| Mount Type | Surface, Through Hole | |
| Pin Count | 64 | |
| Device Core | ARM Cortex M3 | |
| Data Bus Width | 32bit | |
| Program Memory Size | 256kB | |
| Interface Type | USART, SPI, 2 Wire I2C | |
| Maximum Clock Frequency | 20MHz | |
| RAM Size | 48kB | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Height | 1.45mm | |
| Standards/Approvals | RoHS | |
| Number of Programmable I/Os | 23 | |
| Width | 10 mm | |
| Analogue Comparators | 1 | |
| Length | 10mm | |
| DACs | 2 x 12 Bit | |
| Minimum Supply Voltage | 1.8V | |
| Number of Timers | 1 | |
| Instruction Set Architecture | RISC | |
| Automotive Standard | No | |
| ADCs | 10 x 12 Bit | |
| Program Memory Type | FLASH | |
| 모두 선택 | ||
|---|---|---|
브랜드 Microchip | ||
Product Type Microcontroller | ||
Series Atmega | ||
Package Type LQFP | ||
Mount Type Surface, Through Hole | ||
Pin Count 64 | ||
Device Core ARM Cortex M3 | ||
Data Bus Width 32bit | ||
Program Memory Size 256kB | ||
Interface Type USART, SPI, 2 Wire I2C | ||
Maximum Clock Frequency 20MHz | ||
RAM Size 48kB | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Height 1.45mm | ||
Standards/Approvals RoHS | ||
Number of Programmable I/Os 23 | ||
Width 10 mm | ||
Analogue Comparators 1 | ||
Length 10mm | ||
DACs 2 x 12 Bit | ||
Minimum Supply Voltage 1.8V | ||
Number of Timers 1 | ||
Instruction Set Architecture RISC | ||
Automotive Standard No | ||
ADCs 10 x 12 Bit | ||
Program Memory Type FLASH | ||
SMART SAM3S ARM® Cortex-M3 Microcontrollers
Based on the ARM® Cortex®-M3 core, the Atmel® SMART SAM3S Flash microcontroller (MCU) integrates features to simplify system design and reduce power consumption down to 2.3mW at 1MHz, 1.45mW/MHz at 64MHz operation and 1.6μA in backup mode with the Real-Time-Clock running. The series also includes parallel capture mode, and QTouch capacitive touch support.
관련된 링크들
- Microchip ATSAM3U4CA-AU, 32 bit ARM Cortex M3, Atmega Microcontroller, 20 MHz, 256kB FLASH, 100-Pin LQFP
- Microchip ATSAM3S1AB-AU, 32 bit ARM Cortex M3, Atmega Microcontroller, 20 MHz, 64kB FLASH, 48-Pin LQFP
- Microchip ATSAM4E8CA-AU, 32 bit ARM Cortex M4, ATMEGA8 Microcontroller, 16 MHz, 512kB FLASH, 100-Pin LQFP
- Microchip ATSAM4LC4CA-AU, 32 bit ARM Cortex M4, ATMEGA8 Microcontroller, 16 MHz, 256kB FLASH, 100-Pin TQFP
- Atmel ATSAM3X8EA-AU, 32bit ARM Cortex M3 Microcontroller, ATSAM3, 84MHz, 2 x 256 kB, 16 kB Flash, ROM, 144-Pin LQFP
- Microchip ATSAM4S8BA-AU, 32 bit ARM Cortex M4, SAM3S Microcontroller, 64 MHz, 512kB FLASH, 64-Pin LQFP
- Microchip ATSAM4S2BA-AU, 32 bit ARM Cortex M4, SAM4S Microcontroller, 120 MHz, 128kB FLASH, 64-Pin LQFP
- Microchip ATSAM4S4AA-AU, 16 bit ARM Cortex M4, SAM4S Microcontroller, 120 MHz, 256kB FLASH, 48-Pin LQFP