Microchip, 8 bit PIC, PIC16F18346 Microcontroller, 20 MHz, 28kB FLASH, 20-Pin PDIP

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

현재 비가용
죄송합니다. 언제 재입고될지 모릅니다.
포장 옵션
RS 제품 번호:
124-1556P
제조사 부품 번호:
PIC16F18346-I/P
제조업체:
Microchip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Microchip

Series

PIC16F18346

Product Type

Microcontroller

Package Type

PDIP

Mount Type

Through Hole

Pin Count

20

Device Core

PIC

Data Bus Width

8bit

Program Memory Size

28kB

Interface Type

RS232

Maximum Clock Frequency

20MHz

RAM Size

2kB

Maximum Supply Voltage

6V

Number of Programmable I/Os

13

Minimum Operating Temperature

-40°C

Maximum Power Dissipation Pd

800mW

Maximum Operating Temperature

85°C

Standards/Approvals

No

Width

7.11 mm

Length

26.92mm

Height

4.83mm

Minimum Supply Voltage

2V

ADCs

17 x 10 Bit

Program Memory Type

FLASH

Number of Timers

3

Instruction Set Architecture

RISC

Automotive Standard

No

COO (Country of Origin):
TH

PIC16F18325/18326/18345/18346 8-Bit Microcontrollers


The PIC16F range of Microcontrollers from Microchip are 8-bit MCUs that incorporate Microchip’s PIC® architecture in various pin and package options.

PIC16F18325/18345 Microcontrollers are based on Microchip’s Enhanced Mid-Range core and include new Low-Power features. IDLE and DOZE modes have been added along with Peripheral Module Disable, this allows peripherals to be removed from the power rail and clock tree for zero power leakage.

Microcontroller Features


8 MIPS Max. CPU Speed

49 Instructions

16 Level Hardware Stack

Interrupt Capability

Internal Oscillator

12 or 18 I/O Pins

Power-On Reset (POR)

Configurable Power-Up Timer (PWRTE)

Brown-Out Reset (BOR) and Low-Power Brown-Out Reset (LPBOR)

Extended Watchdog Timer (WDT)

In-Circuit Serial Programming (ICSP)

In-Circuit Debug (ICD)

Low voltage Programming (LVP)

Peripheral Pin Select (PPS)

Power-Saving Features


Peripheral Module Disable (PMD) – Ability to disable unused peripherals for minimal power consumption

SLEEP, IDLE and DOZE Low-Power Modes

Sleep mode: 40 nA @ 1.8 V (typical)

Watchdog Timer: 250 nA @ 1.8 V (typical)

Secondary Oscillator: 300 nA @ 32 kHz

Operating Current: 8 μA @ 32 kHz 1.8 V (typical)

Peripheral Features


10-bit Analogue-to-Digital Converter – 11 or 17 channels depending on model

5-Bit Digital-to-Analogue Converter (DAC)

Two Comparators (COMP)

Voltage Reference

Four Configurable Logic Cells (CLC)

Two Complementary Waveform Generators (CWG)

Four Capture/Compare/PWM (CCP) modules

Two 10-bit PWMs

Numerically Controlled Oscillator (NCO)

EUSART – RS-232, RS-485 and LIN compatible

Two Master Synchronous Serial Ports (MSSP) – I2C, SMBus, PMBus compatible

Data Signal Modulator (DSM)

Four 8-bit Timers with Hardware Limit Timer (HLT)

Three 16-bit Timers