STMicroelectronics Evaluation board with STM32MP157F MPU 32 bit Evaluation Board STM32MP157F-EV1

본 제품군 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩831,918.80

Add to Basket
수량 선택 또는 입력
공급 부족
  • 1 개 단위 배송 준비 완료
당사의 현재 재고는 제한중이며, 제조사측에서는 공급 부족을 예상하고 있습니다.
수량
한팩당
1 - 4₩831,918.80
5 +₩815,280.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
204-4103
제조사 부품 번호:
STM32MP157F-EV1
제조업체:
STMicroelectronics
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

STMicroelectronics

Classification

Evaluation Board

Kit Name

Evaluation board with STM32MP157F MPU

Technology

32 bit

Device Core

ARM 32-bit Cortex-M4

Processor Family Name

Cortex A7, Cortex M4

COO (Country of Origin):
IT
The STM32MP157D-EV1 and STM32MP157F-EV1 Evaluation boards are the full-feature demonstration and development platforms for STMicroelectronics increased-frequency 800 MHz Arm®-based dual Cortex®-A7 32 bits and Cortex®-M4 32 bits MPUs in the STM32MP1 Series. They leverage the capabilities of STM32MP1 Series microprocessors to allow users develop applications using STM32 MPU OpenSTLinux Distribution software for the main processor and STM32CubeMP1 software for the co-processor.

They include an ST-LINK embedded debug tool, LEDs, push-buttons, one joystick, 1-Gbps Ethernet, CAN FD, one USB OTG Micro-AB connector, four USB Host Type-A connectors, LCD display with touch panel, camera, stereo headset jack with analog microphone input, four digital microphones, one SPDIF Rx/Tx, smartcard, microSD™ card, and eMMC, NOR and NAND Flash memories.

To expand the functionality of the STM32MP157D-EV1 and STM32MP157F-EV1 Evaluation boards, two GPIO expansion connectors are also available for motor control and Raspberry Pi® shields.

￮ STM32MP157 Arm®-based dual Cortex®-A7 800 MHz 32 bits + Cortex®-M4 32 bits MPU in LFBGA448 package
￮ ST PMIC STPMIC1
￮ 2 x 4-Gbit DDR3L, 16 bits, 533 MHz
￮ 2 x 512-Mbit Quad-SPI Flash memory
￮ 32-Gbit eMMC v5.0
￮ 8-Gbit SLC NAND, 8 bits, 8-bit ECC, 4-KB PS
￮ 1-Gbit/s Ethernet (RGMII) compliant with IEEE-802.3ab
￮ USB Host 4-port hub
￮ USB OTG HS
￮ CAN FD
￮ 5.5 TFT 720x1280 pixels with LED backlight, MIPI DSISM interface, and capacitive touch panel
￮ SAI audio codec
￮ 5-megapixel, 8-bit camera
￮ 4 x ST-MEMS digital microphones
￮ Smartcard
￮ microSD™ card
￮ 2 user LEDs
￮ 2 user and reset push-buttons, 1 wake-up button
￮ 4-direction joystick with selection button
￮ 5 V / 4 A power supply
￮ Board connectors:
  • Ethernet RJ45

  • 4 x USB Host Type-A

  • USB OTG Micro-AB

  • SPDIF RCA input and output

  • CAN FD

  • Stereo headset jack including analog microphone input

  • Audio jack for external speakers

  • Motor control

  • External I2C

  • LTDC

  • Trace, JTAG, RS-232

  • GPIO expansion connector (Raspberry Pi® shields capability)

  • MEMS-microphone daughterboard expansion connector

￮ On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: Virtual COM port and debug port
￮ STM32CubeMP1 and full mainline open-source Linux® STM32 MPU OpenSTLinux Distribution (such as STM32MP1Starter) software and examples
￮ Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded Workbench®, MDK-ARM, and STM32CubeIDE

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


관련된 링크들