제조사부품번호

Honeywell Short Lever Micro Switch, Solder Terminal, 6A, 250 V, SPDT, IP40

RS 제품 번호:: 205-6076
제조사 부품 번호:: ZM160C10B01
제조업체:: Honeywell

Honeywell Short Lever Micro Switch, Solder Terminal, 6A, 250 V, SPDT, IP40

현재 비가용

RS는 이 제품을 더 이상 판매하지 않습니다.

RS 제품 번호:: 205-6076
제조사 부품 번호:: ZM160C10B01
제조업체:: Honeywell

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell
	Actuator Type	Short Lever
	Product Type	Micro Switch
	Terminal Type	Solder
	Housing Material	PBT
	Contact Configuration	SPDT
	IP Rating	IP40
	Operating Force	150g
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	125°C
	Contact AC Voltage	250V
	Microswitch Type	Subminiature
	Length	19.8mm
	Depth	10.2mm
	Series	ZM1
	Hazardous Area Certification	NO
	Mechanical Life	1000000min
	Standards/Approvals	ENEC to IEC 61058-1, cUL to UL 61058-1, CQC to GB 15092.1, CQC, CE, RoHS, REACH, UL
	Width	6.4mm

	모두 선택
	브랜드 Honeywell
	Actuator Type Short Lever
	Product Type Micro Switch
	Terminal Type Solder
	Housing Material PBT
	Contact Configuration SPDT
	IP Rating IP40
	Operating Force 150g
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 125°C
	Contact AC Voltage 250V
	Microswitch Type Subminiature
	Length 19.8mm
	Depth 10.2mm
	Series ZM1
	Hazardous Area Certification NO
	Mechanical Life 1000000min
	Standards/Approvals ENEC to IEC 61058-1, cUL to UL 61058-1, CQC to GB 15092.1, CQC, CE, RoHS, REACH, UL
	Width 6.4mm

COO (Country of Origin):: CN

Honeywell ZM1 Series Micro Switch, 6A Switch Contact Current, Short Lever Actuator Type - ZM160C10B01

This micro switch is a Compact electromechanical actuator designed for precise switching in control and sensing circuits. It provides a short lever actuation for quick, accurate input and connects via solder terminals for PCB mounting. The device is suitable for environments requiring moderate ingress protection and extended temperature range operation.

Features and Benefits:

• Short lever actuator enables rapid, repeatable switching response
• Single-pole changeover contacts carry up to 6A for power handling
• Solder Terminal simplifies PCB assembly and secure electrical connection
• Rated for operation between -40°C and 125°C for varied thermal conditions
• Mechanical endurance of 400 cycles supports intermittent actuation tasks
• IP40 ingress protection reduces dust-related contact issues

Applications

• Suitable for limit switching in automated machinery
• Ideal for control panels and Interface assemblies on PCBs
• Used with electromechanical relays for signal routing and safety interlocks
• Can be used for position detection in small mechanical systems

What contact arrangement does it offer and how does that affect control circuits?

It uses a single-pole changeover contact configuration, allowing one input to switch between two outputs for simple make/break logic functions.

Which Terminal style is provided and what assembly methods suit it?

The switch has solder terminals, making it appropriate for reflow or hand-soldering on printed circuit boards where a permanent connection is required.

How does the ingress protection rating influence installation?

An IP40 rating means the device is protected against solid objects greater than 1mm but not against water, so it should be mounted in dry or enclosed locations.

What approvals and standards support its use in regulated equipment?

It holds multiple approvals to recognised standards including ENEC to IEC 61058-1, cUL to UL 61058-1 and CQC, alongside CE, RoHS and REACH compliance, allowing integration into certified electrical products.