ABB, Formula DSA, 1SDA06 Molded Case Circuit Breaker 1-Pole 125A, Breaking Capacity 25 kA, Fixed

모든 MCCBs 열람하기

Subtotal (1 unit)*

₩293,680.00

Add to Basket
수량 선택 또는 입력
제조사가 재고 비축중
  • 2026년 9월 08일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩293,680.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
237-6139
제조사 부품 번호:
1SDA066696R1
제조업체:
ABB
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

ABB

Product Type

Molded Case Circuit Breaker

Range

Formula DSA

Series

1SDA06

Number of Poles

1

Current Rating

125A

Breaking Capacity

25kA

Rated AC Voltage

415V ac

Mount Type

Fixed

Rated DC Voltage

125V dc

Terminal Type

Front

Depth

60mm

Standards/Approvals

CE, IEC

Width

25.4mm

Height

130mm

Reset Actuator Type

Lever

Tripping Mechanism

Thermal Magnetic

COO (Country of Origin):
IT

ABB 1SDA06 Series Molded Case Circuit Breaker, 125A Current Rating, 25kA Breaking Capacity - 1SDA066696R1


This moulded-case circuit breaker provides overcurrent protection for single-phase installations in industrial and commercial control systems. It operates via a thermal-magnetic tripping mechanism to interrupt fault currents and is intended for fixed mounting with front-access connections. Designed to meet recognised European and international standards, it is suitable for systems requiring reliable manual resetting and clear actuation.

Features and Benefits:


• 125A rated current offers high continuous load-handling capability • 25 kA breaking capacity limits prospective short-circuit energy • Thermal-magnetic trip delivers combined overload and fault protection • Single-pole configuration enables selective supply isolation • Front-terminal design facilitates straightforward wiring access • Lever reset actuator permits quick manual reclosure after trip

Applications


• Suitable for protection of distribution panels in automation systems • Ideal for safeguarding motor-control circuits in factories • Used with control cabinets in electrical and electronics workshops • Can be used for single-phase protection in mechanical plant installations

What mounting arrangement does it require?


It is intended for a fixed-mount installation that secures the device permanently within a panel or enclosure.

How is the device accessed for wiring and maintenance?


Terminals are positioned at the front to allow direct connection and ease of inspection without panel removal.

Which voltages can it interrupt during operation?


It is rated for operation on AC at 415V and can also be used in DC systems up to 125V for interrupting circuits.

What approvals govern its design and manufacture?


The unit is produced to meet CE and IEC requirements applicable to this category of protective equipment.

관련된 링크들