Megger RCDT320-EN-BS RCD Tester, Loop Impedance Test Type 2 Wire 300V, RCD Test Type DC, RCD Test Current 1000 mA CAT
- RS 제품 번호:
- 712-5746
- 제조사 부품 번호:
- RCDT320-EN-BS
- 제조업체:
- Megger
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
Subtotal (1 unit)*
₩1,530,282.00
마지막 RS 재고
- 최종적인 7 개 unit(s)이 배송 준비 됨
수량 | 한팩당 |
|---|---|
| 1 + | ₩1,530,282.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 712-5746
- 제조사 부품 번호:
- RCDT320-EN-BS
- 제조업체:
- Megger
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Megger | |
| Product Type | RCD Tester | |
| Test Equipment Type | RCD Tester | |
| Loop Impedance Test Type | 2 Wire | |
| Maximum Voltage Measurement | 300V | |
| RCD Test Type | DC | |
| RCD Test Current | 1000mA | |
| Display Type | LCD | |
| Battery Type | AA | |
| Minimum Operating Temperature | -5°C | |
| Power Source | Battery | |
| Maximum Operating Temperature | 40°C | |
| Standards/Approvals | IEC 61326-1 | |
| Height | 78mm | |
| Weight | 980g | |
| Length | 203mm | |
| Width | 148mm | |
| Safety Category Level | CAT III | |
| Safety Category Voltage | 300V | |
| Plug Type | 3-Pin (Global) | |
| 모두 선택 | ||
|---|---|---|
브랜드 Megger | ||
Product Type RCD Tester | ||
Test Equipment Type RCD Tester | ||
Loop Impedance Test Type 2 Wire | ||
Maximum Voltage Measurement 300V | ||
RCD Test Type DC | ||
RCD Test Current 1000mA | ||
Display Type LCD | ||
Battery Type AA | ||
Minimum Operating Temperature -5°C | ||
Power Source Battery | ||
Maximum Operating Temperature 40°C | ||
Standards/Approvals IEC 61326-1 | ||
Height 78mm | ||
Weight 980g | ||
Length 203mm | ||
Width 148mm | ||
Safety Category Level CAT III | ||
Safety Category Voltage 300V | ||
Plug Type 3-Pin (Global) | ||
제외
- COO (Country of Origin):
- GB
Megger RCD Tester, 25 to 450Hz Frequency Measurement Range, Backlit Display - RCDT300 Series - RCDT320-EN-BS
Probe your electrical safety system to make sure it's in good working condition with this RCD tester from Megger. It simulates an earth leakage to check how your device responds and if it trips the circuit. The built-in ramp testing feature lets you pinpoint the trip current of your RCD, so you can tell when nuisance tripping is happening with the wrong current flow. You can also use this handy piece of kit to measure frequencies between 25 and 450Hz.
Features & Benefits
• Display is backlit for easy viewing in low-light conditions
• Auto power-down function helps to conserve battery life
Applications
• Server rooms
• Repair workshops
• Aerospace engineering
• Automotive wiring
How accurate is this tester?
It has a voltage accuracy of ±2% and a frequency accuracy of ±0.1Hz for measurements between 25 and 199.9Hz. An accuracy of ±1Hz when measuring frequencies of 200 to 450Hz means you can be sure of all-round precise measurements.
What's the polarity selection range of this tester?
You can set the polarity check of this tester to 0 or 180° to test how safe your live and neutral wires are.
관련된 링크들
- Megger RCDT310-EN-BS RCD Tester, Loop Impedance Test Type 2 Wire 300V ac, RCD Test Type DC Selective, AC Selective, RCD
- Megger LTW425-EU-BS Loop Impendence & RCD Combined Tester, Loop Impedance Test Type 2 Wire 440V, RCD Test Type AC, RCD
- Megger LTW325-EU-BS Loop Impendence & RCD Combined Tester, Loop Impedance Test Type 2 Wire 440V, RCD Test Type AC, RCD
- Megger LTW315-EU-BS Loop Impendence Tester, Loop Impedance Test Type 2 Wire, 3 Wire 440V, RCD Test Type AC, RCD Test
- Megger LRCD220-EN-BS Loop Impendence & RCD Combined Tester, Loop Impedance Test Type 2 Wire 500V, RCD Test Type AC, DC,
- Kewtech Corporation FC2000 Loop Impendence & RCD Combined Tester, Loop Impedance Test Type 2 Wire 1000V, RCD Test Type
- Gossen Metrawatt M507B Loop Impendence Tester, Loop Impedance Test Type 2 Wire 260V, RCD Test Type AC Selective, RCD
- RS PRO Digital RCD Tester, RCD Test Type AC, RCD Test Current 500 mA