제조사부품번호

Igus Bearing Block WJ200UM-01-20 DryLin W Series

RS 제품 번호:: 667-1295
제조사 부품 번호:: WJ200UM-01-20
제조업체:: Igus

Igus Bearing Block WJ200UM-01-20 DryLin W Series

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 unit)*

₩36,020.00

추가로 2026년 8월 24일 부터 123 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 5	₩36,020.00
6 - 11	₩34,580.00
12 +	₩33,140.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 667-1295
제조사 부품 번호:: WJ200UM-01-20
제조업체:: Igus

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Igus
	Series	DryLin W
	Product Type	Bearing Block
	Carriage Length	45mm
	Carriage Width	42.5mm
	Static Load Rating	3200N
	Acceptable Rail Width	82mm
	Carriage Material	Die Cast Zinc
	Carriage Type	Slider
	Standards/Approvals	No

	모두 선택
	브랜드 Igus
	Series DryLin W
	Product Type Bearing Block
	Carriage Length 45mm
	Carriage Width 42.5mm
	Static Load Rating 3200N
	Acceptable Rail Width 82mm
	Carriage Material Die Cast Zinc
	Carriage Type Slider
	Standards/Approvals No

DryLin W Data Sheet

COO (Country of Origin):: DE

Igus DryLin W Series Bearing Block, 3200N Static Load Rating, 45mm Carriage Length - WJ200UM-01-20

This bearing block provides guided linear motion support for industrial automation and mechanical systems, designed to run on compatible rails and carry carriage loads in constrained assemblies. It is intended for use where a compact slider carriage is required to transmit static loads while integrating with DryLin linear guide setups.

Features and Benefits:

• Static capacity 3200N delivers robust load support for assemblies
• Carriage constructed from die-cast zinc reduces wear under load
• Slider format enables smooth linear guidance with minimal maintenance
• Carriage width 42.5mm offers a narrow footprint for tight installations
• Accepts rails up to 82mm to support a range of guide profiles

Applications

• Suitable for pick-and-place gantry axis in automation cells
• Ideal for mounting sensors or actuators on linear stages
• Used with compact conveyor transfer systems in electronics lines
• Can be used for sliding fixtures in electrical panel assembly

What carriage length is provided for mounting requirements?

The block uses a 45mm carriage which offers a short mounting base for integrating brackets and fitted components.

What material considerations affect thermal and mechanical behaviour?

The carriage alloy is die-cast zinc, which provides dimensional stability and predictable expansion under temperature variations compared with some plastics.

Which rail widths will this block interface with?

It is compatible with rails having a nominal width of up to 82mm, allowing selection from a range of standard linear guide profiles.

How does the static load rating influence selection for stationary loads?

The 3200N static rating defines the maximum non-moving load the carriage can sustain without exceeding its static capacity, useful for specifying supports in stopped or parked conditions.