Ewellix Makers in Motion LBCT 12 A-2LS Bearing with 12 mm ID 22 mm OD 1160 N 980 N
- RS 제품 번호:
- 423-2318
- 제조사 부품 번호:
- LBCT 12 A-2LS
- 제조업체:
- Ewellix Makers in Motion
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩98,568.40
재고있음
- 5 개 단위 배송 준비 완료
- 추가로 2026년 3월 02일 부터 9 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 5 | ₩98,568.40 |
| 6 - 11 | ₩94,620.40 |
| 12 + | ₩90,691.20 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 423-2318
- 제조사 부품 번호:
- LBCT 12 A-2LS
- 제조업체:
- Ewellix Makers in Motion
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Ewellix Makers in Motion | |
| Product Type | Bearing | |
| Outside Diameter | 22 mm | |
| Length | 32mm | |
| Inside Diameter | 12 mm | |
| End Type | Sealed | |
| Dynamic Load Rating | 1160N | |
| Material | Steel | |
| Closure Type | Open | |
| Base to Bore Centerline | 11mm | |
| Static Load Rating | 980N | |
| Series | LBCT | |
| Standards/Approvals | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 Ewellix Makers in Motion | ||
Product Type Bearing | ||
Outside Diameter 22 mm | ||
Length 32mm | ||
Inside Diameter 12 mm | ||
End Type Sealed | ||
Dynamic Load Rating 1160N | ||
Material Steel | ||
Closure Type Open | ||
Base to Bore Centerline 11mm | ||
Static Load Rating 980N | ||
Series LBCT | ||
Standards/Approvals No | ||
제외
- COO (Country of Origin):
- DE
LBCT/LBHT Ball Bushings - Open
Radial and axial lip seals protect against bearing contamination
High dynamic and static load-carrying capacity
Dimensions series 3 of ISO10285
Increased shaft support
Must be located in axial direction
SKF Linear Ball Bushings & Sets
Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that higher frictional forces must be expected with linear plain bearings.,Ball bushings comprise a cage, in which the balls are guided, along with the raceway segments and integral seals,Further axial securing is often unnecessary when linear ball bearings and linear plain bearings are pressed into a J7 or J6 tolerance hole.
관련된 링크들
- Ewellix Makers in Motion LBCR12 D-2LS Bearing with 12 mm ID 22 mm OD 1160 N 980 N
- Ewellix Makers in Motion LBCR12 D Bearing with 12 mm ID 22 mm OD 1160 N 980 N
- Ewellix Makers in Motion LBCT 16 A-2LS Bearing with 16 mm ID 26 mm OD 1500 N 1290 N
- Ewellix Makers in Motion LBBR 20-2LS Bearing with 20 mm ID 28 mm OD 1160 N 800 N
- Ewellix Makers in Motion LBBR 20-2LS/HV6 Bearing with 20 mm ID 28 mm OD 1160 N 800 N
- Ewellix Makers in Motion LBBR 20 Bearing with 20 mm ID 28 mm OD 1160 N 800 N
- Ewellix Makers in Motion LBBR 12-2LS Bearing with 12 mm ID 19 mm OD 695 N 510 N
- Ewellix Makers in Motion Bearing Unit LUHR 12-2LS LUHR Series