Ewellix Makers in Motion LBCD30 D -2LS Bearing with 30 mm ID 47 mm OD 4650 N 3250 N
- RS 제품 번호:
- 284-9683
- 제조사 부품 번호:
- LBCD30 D -2LS
- 제조업체:
- Ewellix Makers in Motion
Subtotal (1 unit)*
₩153,671.20
일시적 품절
- 2026년 3월 25일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩153,671.20 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 284-9683
- 제조사 부품 번호:
- LBCD30 D -2LS
- 제조업체:
- Ewellix Makers in Motion
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Ewellix Makers in Motion | |
| Product Type | Bearing | |
| Outside Diameter | 47 mm | |
| Length | 68mm | |
| Inside Diameter | 30 mm | |
| End Type | Sealed | |
| Dynamic Load Rating | 4650N | |
| Base to Bore Centerline | 23.5mm | |
| Material | Steel | |
| Closure Type | Closed | |
| Static Load Rating | 3250N | |
| Standards/Approvals | No | |
| Series | LBCD | |
| 모두 선택 | ||
|---|---|---|
브랜드 Ewellix Makers in Motion | ||
Product Type Bearing | ||
Outside Diameter 47 mm | ||
Length 68mm | ||
Inside Diameter 30 mm | ||
End Type Sealed | ||
Dynamic Load Rating 4650N | ||
Base to Bore Centerline 23.5mm | ||
Material Steel | ||
Closure Type Closed | ||
Static Load Rating 3250N | ||
Standards/Approvals No | ||
Series LBCD | ||
- COO (Country of Origin):
- DE
Linear bearings, LBCD
Standard linear bearings LBCD from ISO range 3
Automatic self-alignment of max. ±30 angular minutes
Non-parallels between drive shaft and housing bore, produced by shaft deflection or assembly or manufacturing inaccuracies, can be compensated
Misalignments of drive shafts with one another cannot be compensated
Angled pivoting of bearings is possible thanks to special outer contour of runner plates
Pivotable cage reduced in outer diameter
Bearings fitted in housing and sealing or cover discs always central to drive shaft
All other features of LBCR linear bearings are the same for the angle-adjustable LBCD design
LBCD linear bearings must be secured in the axial plane
SKF Linear Ball Bushings & Sets
Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that higher frictional forces must be expected with linear plain bearings.,Ball bushings comprise a cage, in which the balls are guided, along with the raceway segments and integral seals,Further axial securing is often unnecessary when linear ball bearings and linear plain bearings are pressed into a J7 or J6 tolerance hole.
관련된 링크들
- Ewellix Makers in Motion LBCD12 D Bearing with 12 mm ID 22 mm OD 1080 N 815 N
- Ewellix Makers in Motion LBBR 30-2LS Bearing with 30 mm ID 40 mm OD 3150 N 2700 N
- Ewellix Makers in Motion LBCR30 D-2LS Bearing with 30 mm ID 47 mm OD 5600 N 5700 N
- Ewellix Makers in Motion Bearing Unit LUHR 30-2LS LUNE Series
- Ewellix Makers in Motion LBBR 30-2LS/HV6 Bearing with 30 mm ID 40 mm OD 3150 N 2700 N
- Ewellix Makers in Motion LBBR 30 Bearing with 30 mm ID 40 mm OD 3150 N 2700 N
- Ewellix Makers in Motion LBCR 5-2LS Bearing with 5 mm ID 12 mm OD 280 N 210 N
- Ewellix Makers in Motion LBBR 12-2LS Bearing with 12 mm ID 19 mm OD 695 N 510 N