Ewellix Makers in Motion LBCD12 D Bearing with 12 mm ID 22 mm OD 1080 N 815 N
- RS 제품 번호:
- 284-9582
- 제조사 부품 번호:
- LBCD12 D
- 제조업체:
- Ewellix Makers in Motion
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩89,973.00
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량 | 한팩당 |
|---|---|
| 1 - 4 | ₩89,973.00 |
| 5 - 9 | ₩86,385.00 |
| 10 + | ₩84,571.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 284-9582
- 제조사 부품 번호:
- LBCD12 D
- 제조업체:
- Ewellix Makers in Motion
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Ewellix Makers in Motion | |
| Product Type | Bearing | |
| Outside Diameter | 22 mm | |
| Length | 32mm | |
| Inside Diameter | 12 mm | |
| End Type | Shielded | |
| Dynamic Load Rating | 1080N | |
| Base to Bore Centerline | 11mm | |
| Static Load Rating | 815N | |
| Closure Type | Closed | |
| Material | Steel | |
| Standards/Approvals | No | |
| Series | LBCD | |
| 모두 선택 | ||
|---|---|---|
브랜드 Ewellix Makers in Motion | ||
Product Type Bearing | ||
Outside Diameter 22 mm | ||
Length 32mm | ||
Inside Diameter 12 mm | ||
End Type Shielded | ||
Dynamic Load Rating 1080N | ||
Base to Bore Centerline 11mm | ||
Static Load Rating 815N | ||
Closure Type Closed | ||
Material Steel | ||
Standards/Approvals No | ||
Series LBCD | ||
- COO (Country of Origin):
- DE
Linear bearings, LBCD
Standard linear bearings LBCD from ISO range 3
Automatic self-alignment of max. ±30 angular minutes
Non-parallels between drive shaft and housing bore, produced by shaft deflection or assembly or manufacturing inaccuracies, can be compensated
Misalignments of drive shafts with one another cannot be compensated
Angled pivoting of bearings is possible thanks to special outer contour of runner plates
Pivotable cage reduced in outer diameter
Bearings fitted in housing and sealing or cover discs always central to drive shaft
All other features of LBCR linear bearings are the same for the angle-adjustable LBCD design
LBCD linear bearings must be secured in the axial plane
SKF Linear Ball Bushings & Sets
Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that higher frictional forces must be expected with linear plain bearings.,Ball bushings comprise a cage, in which the balls are guided, along with the raceway segments and integral seals,Further axial securing is often unnecessary when linear ball bearings and linear plain bearings are pressed into a J7 or J6 tolerance hole.
관련된 링크들
- Ewellix Makers in Motion LBCD30 D -2LS Bearing with 30 mm ID 47 mm OD 4650 N 3250 N
- Ewellix Makers in Motion LBBR 12 Bearing with 12 mm ID 19 mm OD 695 N 510 N
- Ewellix Makers in Motion LBCR12 D Bearing with 12 mm ID 22 mm OD 1160 N 980 N
- Ewellix Makers in Motion Bearing Unit LUHR 12 LUHR Series
- Ewellix Makers in Motion LBBR 12-2LS Bearing with 12 mm ID 19 mm OD 695 N 510 N
- Ewellix Makers in Motion LPAR 12 Bearing with 22 mm OD
- Ewellix Makers in Motion LPBR 12 Bearing with 19 mm OD
- Ewellix Makers in Motion LBBR 6 A Bearing with 6 mm ID 12 mm OD 335 N 270 N