제조사부품번호

INA KBS16-PP-AS Bearing with 16 mm ID 26 mm OD 840 N 780 N

RS 제품 번호:: 172-1233
제조사 부품 번호:: KBS16-PP-AS
제조업체:: INA

INA KBS16-PP-AS Bearing with 16 mm ID 26 mm OD 840 N 780 N

모든 Linear Bearings 열람하기

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 unit)*

₩105,840.00

재고있음

추가로 2026년 11월 02일 부터 4 개 단위 배송
추가로 2026년 11월 24일 부터 2 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 4	₩105,840.00
5 - 9	₩102,640.00
10 +	₩99,460.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 172-1233
제조사 부품 번호:: KBS16-PP-AS
제조업체:: INA

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	INA
	Product Type	Bearing
	Outside Diameter	26mm
	Length	36mm
	Inside Diameter	16mm
	End Type	Sealed
	Dynamic Load Rating	840N
	Static Load Rating	780N
	Base to Bore Centerline	13mm
	Closure Type	Closed
	Standards/Approvals	No

	모두 선택
	브랜드 INA
	Product Type Bearing
	Outside Diameter 26mm
	Length 36mm
	Inside Diameter 16mm
	End Type Sealed
	Dynamic Load Rating 840N
	Static Load Rating 780N
	Base to Bore Centerline 13mm
	Closure Type Closed
	Standards/Approvals No

Datasheet

로그인하여 CAD 모델 다운로드

Schaeffler Bearing, 16mm Inside Diameter, 26mm Outside Diameter - KBS16-PP-AS

This bearing is a sealed rotary component intended to support radial loads in Compact assemblies. It provides a protected rolling Interface for shafts in confined spaces, offering a combination of load capacity and sealed construction suitable for environments where contamination control and consistent rotational support are required.

Features and Benefits:

• 840N dynamic load capacity for sustained rotational forces
• 780N static load capacity for high standstill loads
• Sealed end type to restrict ingress and contamination
• 13mm base to bore centreline for precise mounting alignment
• 36mm overall length for constrained axial accommodation

Applications

• Suitable for Compact drive assemblies in light vehicles
• Ideal for small gearbox input or output shafts
• Used with electric motor shaft supports in confined spaces
• Can be used for pulley or idler wheel rotational support
• Suitable for industrial equipment requiring contamination control

What mounting datum should I reference for alignment?

Use the 13mm base to bore centreline as the primary datum for siting and alignment.

How does the sealed construction affect maintenance intervals?

The sealed configuration reduces contaminant ingress, thereby extending lubrication life and lowering inspection frequency compared with unsealed units.

What load types is this unit primarily designed to handle?

It is designed mainly for radial loads, with the specified dynamic and static capacities guiding selection.

Which dimensional measurements define compatibility with shafts and housings?

Match the 16mm inside diameter for shaft fit and the 26mm outside diameter for housing-bore compatibility.