INA KBS25-PP-AS Bearing with 25 mm ID 40 mm OD 2950 N 2850 N
- RS 제품 번호:
- 172-1235
- 제조사 부품 번호:
- KBS25-PP-AS
- 제조업체:
- INA
대량 구매 할인 기용 가능
View bulk pricing optionsSubtotal (1 unit)*
₩154,120.00
재고있음
- 추가로 2026년 10월 12일 부터 1 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 4 | ₩154,120.00 |
| 5 + | ₩150,880.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 172-1235
- 제조사 부품 번호:
- KBS25-PP-AS
- 제조업체:
- INA
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | INA | |
| Product Type | Bearing | |
| Length | 58mm | |
| End Type | Sealed | |
| Dynamic Load Rating | 2950N | |
| Static Load Rating | 2850N | |
| Closure Type | Closed | |
| Base to Bore Centerline | 20mm | |
| Standards/Approvals | No | |
| Series | KBS | |
| 모두 선택 | ||
|---|---|---|
브랜드 INA | ||
Product Type Bearing | ||
Length 58mm | ||
End Type Sealed | ||
Dynamic Load Rating 2950N | ||
Static Load Rating 2850N | ||
Closure Type Closed | ||
Base to Bore Centerline 20mm | ||
Standards/Approvals No | ||
Series KBS | ||
Schaeffler KBS Series Bearing, 25mm Inside Diameter, 40mm Outside Diameter - KBS25-PP-AS
This bearing is a sealed rotary component designed to support radial loads in Compact assemblies. It features a sealed end type closure to limit contamination ingress and is suited to applications where a low profile, enclosed unit is required. The product is intended for use within machinery that demands contained lubrication and consistent rotational support.
Features and Benefits:
• Dynamic capacity 2950N delivering sustained operational load handling
• Static capacity 2850N resisting Peak or shock loads
• Closed closure type limiting particle ingress during operation
• Base to bore centreline 20mm enabling precise shaft alignment
• Sealed end type reducing maintenance frequency and lubricant loss
• Static capacity 2850N resisting Peak or shock loads
• Closed closure type limiting particle ingress during operation
• Base to bore centreline 20mm enabling precise shaft alignment
• Sealed end type reducing maintenance frequency and lubricant loss
Applications
• Suitable for rotary shafts in Compact industrial gearboxes
• Ideal for driven rollers in material-handling equipment
• Used with small motor assemblies requiring enclosed bearings
• Can be used for pivot joints in automated machinery
• Ideal for driven rollers in material-handling equipment
• Used with small motor assemblies requiring enclosed bearings
• Can be used for pivot joints in automated machinery
What internal shaft size will the component accept?
It accepts shafts that match a 25mm inside diameter.
How does the unit perform under sudden load increases?
It offers a static load capacity of 2850N to withstand short-term Peak loads.
What outer envelope must be allowed in housing design?
The unit requires a 40mm outside diameter clearance for correct installation.
How much axial length should a designer allocate along the shaft?
Allocate 58mm of axial space to accommodate the full bearing length.
관련된 링크들
- INA KB25-PP-AS Bearing with 25 mm ID 40 mm OD 2950 N 2850 N
- INA KB25-PP Bearing with 25 mm ID 40 mm OD 2950 N 2850 N
- INA KBO25-PP-AS Bearing with 25 mm ID 40 mm OD 2850 N 2300 N
- INA KB25 Bearing with 25 mm ID 40 mm OD 2950 N 2850 N
- INA KBS16-PP-AS Bearing with 16 mm ID 26 mm OD 840 N 780 N
- INA KBS12-PP-AS Bearing with 12 mm ID 22 mm OD 640 N 570 N
- INA KBS30-PP-AS Bearing with 30 mm ID 47 mm OD 3800 N 3600 N
- INA KBS40-PP-AS Bearing with 40 mm ID 62 mm OD 6400 N 5600 N