STMicroelectronics L6364W 2-Channel Line Transceiver, 3 State, Inverting, 20-Pin
- RS 제품 번호:
- 234-8874P
- 제조사 부품 번호:
- L6364W
- 제조업체:
- STMicroelectronics
대량 구매 할인 기용 가능
Subtotal 10 units (supplied on a continuous strip)*
₩77,644.00
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량 | 한팩당 |
|---|---|
| 10 - 99 | ₩7,764.40 |
| 100 - 249 | ₩7,463.60 |
| 250 - 499 | ₩7,238.00 |
| 500 + | ₩7,012.40 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 234-8874P
- 제조사 부품 번호:
- L6364W
- 제조업체:
- STMicroelectronics
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | STMicroelectronics | |
| Product Type | Line Transceiver | |
| Logic Family | CMOS | |
| Logic Function | Buffer & Line Driver | |
| Number of Channels | 2 | |
| Input Type | CMOS | |
| Output Type | 3 State | |
| Polarity | Inverting | |
| Pin Count | 20 | |
| Minimum Supply Voltage | 5V | |
| Maximum Supply Voltage | 35V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Propagation Delay Time @ CL | 10μs | |
| Maximum Operating Temperature | 150°C | |
| Height | 0.47mm | |
| Length | 2.57mm | |
| Standards/Approvals | No | |
| Series | L6364 | |
| Width | 2.57 mm | |
| Supply Current | 50mA | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 STMicroelectronics | ||
Product Type Line Transceiver | ||
Logic Family CMOS | ||
Logic Function Buffer & Line Driver | ||
Number of Channels 2 | ||
Input Type CMOS | ||
Output Type 3 State | ||
Polarity Inverting | ||
Pin Count 20 | ||
Minimum Supply Voltage 5V | ||
Maximum Supply Voltage 35V | ||
Minimum Operating Temperature -40°C | ||
Maximum Propagation Delay Time @ CL 10μs | ||
Maximum Operating Temperature 150°C | ||
Height 0.47mm | ||
Length 2.57mm | ||
Standards/Approvals No | ||
Series L6364 | ||
Width 2.57 mm | ||
Supply Current 50mA | ||
Automotive Standard No | ||
The STMicroelectronics dual channel transceiver for industrial sensor applications has been designed to support even the IO-Link standard and acts as a bridge between a microcontroller with a sensor or actuator function and a 24 V supply and signalling cable. In normal operation the L6364 is configured at start up by the microcontroller via the SPI interface. Typically, the L6364 then operates as a Single Input Output device driving the output lines as configured by the microcontroller. If the device is connected to an IO-Link Master, then the Master can initiate communication and exchange data with the microcontroller while the L6364 acts as a physical layer for the communication.
Supply voltage from 5 V to 35 V
2.5 V to 5 V compatible I/Os
3.3 V and 5 V, 50 mA linear regulators
50 mA DC-DC regulator with configurable frequency (0.5 MHz to 2 MHz) & voltage