Renesas Electronics ISL81487EIPZ Line Transceiver, 3 State, Bipolar, 8-Pin PDIP
- RS 제품 번호:
- 196-8053P
- 제조사 부품 번호:
- ISL81487EIPZ
- 제조업체:
- Renesas Electronics
대량 구매 할인 기용 가능
View bulk pricing optionsSubtotal 15 units (supplied in a tube)*
₩32,040.00
일시적 품절
- 2027년 4월 16일 부터 895 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 15 - 20 | ₩2,136.00 |
| 25 + | ₩2,096.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 196-8053P
- 제조사 부품 번호:
- ISL81487EIPZ
- 제조업체:
- Renesas Electronics
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Renesas Electronics | |
| Logic Family | CMOS | |
| Product Type | Line Transceiver | |
| Logic Function | Transceiver | |
| IC Type | Line Transceiver IC | |
| Input Type | Differential | |
| Output Type | 3 State | |
| Polarity | Bipolar | |
| Mount Type | Through Hole | |
| Package Type | PDIP | |
| Pin Count | 8 | |
| Minimum Supply Voltage | -7V | |
| Maximum Supply Voltage | 12V | |
| Maximum Propagation Delay Time @ CL | 30ns | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Series | ISL81487E | |
| Width | 6.2mm | |
| Standards/Approvals | No | |
| Length | 10.16mm | |
| Height | 5.33mm | |
| Supply Current | 500μA | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 Renesas Electronics | ||
Logic Family CMOS | ||
Product Type Line Transceiver | ||
Logic Function Transceiver | ||
IC Type Line Transceiver IC | ||
Input Type Differential | ||
Output Type 3 State | ||
Polarity Bipolar | ||
Mount Type Through Hole | ||
Package Type PDIP | ||
Pin Count 8 | ||
Minimum Supply Voltage -7V | ||
Maximum Supply Voltage 12V | ||
Maximum Propagation Delay Time @ CL 30ns | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Series ISL81487E | ||
Width 6.2mm | ||
Standards/Approvals No | ||
Length 10.16mm | ||
Height 5.33mm | ||
Supply Current 500μA | ||
Automotive Standard No | ||
The Renesas Electronics are Bi CMOS 3.3V powered, single transceiver that meet both the RS-485 and RS-422 standard for balanced communication. these device have very low bus current and this allows up to 256 transceiver on the network without violating the RS-485 specification ,32 unit load maximum and without using repeater. It configured as full duplex (separate Rx input and Tx output pins) application. The half duplex version multiplex the Rx input and Tx output to allow transceiver with output disable function.
RS-485 I/O pin ESD protection
Fractional unit load allows up to 256 devices on the bus
Specified for 10% tolerance supplies
High data rate version
Slew rate limited versions for error free data transmission
30ns propagation delay
Operate from a single +5V supply (10% tolerance)
Current limiting and thermal shutdown for driver overload
관련된 링크들
- 515015-601 | Latching Push Button Switch, IP67, Panel Mount
- RS PRO Steel Perforated DIN Rail, Top Hat Compatible, 500mm x 35mm x 7.5mm
- 52104571 | Lapp Cable Gland Adaptor, M20 Exterior Thread, M16 Interior Thread, Nickel Plated Brass, SKINDICHT Series
- H3CR-A8 AC24-48/DC12-48 | Omron H3CR Series DIN Rail, Panel Mount Timer Relay, 12 → 48 V dc, 24 → 48V ac, 2-Contact, 0.05 s
- RS PRO Type K Thermocouple 2m Length, 0.3mm Diameter → +600°C
- 6EP3334-8SB00-0AY0 | Siemens SITOP PSU8200 Switched Mode DIN Rail Power Supply, 120 → 230V ac ac Input, 24V dc dc Output, 10A Output,
- BD-02PMMS-LC7001 | Amphenol Industrial Circular Connector, 2 Contacts, Panel Mount, Plug, Male, IP67, Ceres Series
- Fluke LVD2 Non Contact Voltage Detector
