제조사부품번호

STMicroelectronics ST485EXDR 1-Channel Line Transceiver, Differential, Inverting, Non-Inverting, 8-Pin SO-8

RS 제품 번호:: 151-532P
제조사 부품 번호:: ST485EXDR
제조업체:: STMicroelectronics

STMicroelectronics ST485EXDR 1-Channel Line Transceiver, Differential, Inverting, Non-Inverting, 8-Pin SO-8

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal 50 units (supplied on a continuous strip)*

₩115,244.00

재고있음

추가로 2026년 3월 23일 부터 2,480 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
50 - 95	₩2,304.88
100 - 495	₩2,139.44
500 - 995	₩1,966.48
1000 +	₩1,891.28

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 151-532P
제조사 부품 번호:: ST485EXDR
제조업체:: STMicroelectronics

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	STMicroelectronics
	Product Type	Line Transceiver
	Logic Function	Transceiver
	Number of Channels	1
	IC Type	Transceiver IC
	Input Type	Differential
	Output Type	Differential
	Polarity	Inverting, Non-Inverting
	Mount Type	Surface
	Package Type	SO-8
	Pin Count	8
	Minimum Supply Voltage	-7V
	Maximum Supply Voltage	12V
	Maximum Propagation Delay Time @ CL	30ns
	Minimum Operating Temperature	-55°C
	Maximum Operating Temperature	125°C
	Series	ST
	Standards/Approvals	IEC-1000-4-2, RoHS
	Width	4 mm
	Height	1.75mm
	Length	5mm
	Supply Current	300μA
	Automotive Standard	No

	모두 선택
	브랜드 STMicroelectronics
	Product Type Line Transceiver
	Logic Function Transceiver
	Number of Channels 1
	IC Type Transceiver IC
	Input Type Differential
	Output Type Differential
	Polarity Inverting, Non-Inverting
	Mount Type Surface
	Package Type SO-8
	Pin Count 8
	Minimum Supply Voltage -7V
	Maximum Supply Voltage 12V
	Maximum Propagation Delay Time @ CL 30ns
	Minimum Operating Temperature -55°C
	Maximum Operating Temperature 125°C
	Series ST
	Standards/Approvals IEC-1000-4-2, RoHS
	Width 4 mm
	Height 1.75mm
	Length 5mm
	Supply Current 300μA
	Automotive Standard No

Datasheet - ST485EXDR

COO (Country of Origin):: CN

The STMicroelectronics Low power transceiver for RS485 and RS422 communication. Each driver output and receiver input is protected against ± 15 kV electrostatic discharge shocks, without latch up. These parts contain one driver and one receiver in half duplex configuration. This transceiver draws 300 μA of supply current when unloaded or fully loaded with disabled drivers.

Designed for RS485 Interface application

70 mV typical input hysteresis

30 ns propagation delay and 5 ns skew

Current limiting and thermal shutdown

ESD protection

Allows up to 256 transceivers on the bus