Honeywell BAF Series Plunger Limit Switch, SPDT, IP3, IP4, Zinc Die Cast Housing, 480V ac, 20A

RS 제품 번호:: 808-7446
제조사 부품 번호:: BAF1-2RN-RH
제조업체:: Honeywell

Honeywell BAF Series Plunger Limit Switch, SPDT, IP3, IP4, Zinc Die Cast Housing, 480V ac, 20A

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩441,460.50

일시적 품절

2026년 7월 27일 부터 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 12	₩441,460.50
13 - 24	₩428,220.00
25 +	₩415,369.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 808-7446
제조사 부품 번호:: BAF1-2RN-RH
제조업체:: Honeywell

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell
	Product Type	Limit Switch
	Actuator Type	Plunger
	Contact Configuration	SPDT
	IP Rating	IP3, IP4
	Housing Material	Zinc Die Cast
	Contact Type	Snap Action
	Terminal Type	Screw
	Switching Current	20A
	Series	BAF
	Switching DC Voltage	250V dc
	Minimum Operating Temperature	-32°C
	Switching AC Voltage	480V ac
	Maximum Operating Temperature	71°C
	Standards/Approvals	CSA, RoHS, UL
	Width	54.8mm
	Depth	33mm
	Length	101.6mm
	Hazardous Area Certification	NEMA 1
	Operating Force	11.2N
	Mounting Orientation	Vertical
	Conduit Entry	14 NPT

	모두 선택
	브랜드 Honeywell
	Product Type Limit Switch
	Actuator Type Plunger
	Contact Configuration SPDT
	IP Rating IP3, IP4
	Housing Material Zinc Die Cast
	Contact Type Snap Action
	Terminal Type Screw
	Switching Current 20A
	Series BAF
	Switching DC Voltage 250V dc
	Minimum Operating Temperature -32°C
	Switching AC Voltage 480V ac
	Maximum Operating Temperature 71°C
	Standards/Approvals CSA, RoHS, UL
	Width 54.8mm
	Depth 33mm
	Length 101.6mm
	Hazardous Area Certification NEMA 1
	Operating Force 11.2N
	Mounting Orientation Vertical
	Conduit Entry 14 NPT

Honeywell BAF Series Limit Switch, 20A Switching Current, 480V Switching AC Voltage - BAF1-2RN-RH

This limit switch provides mechanical position detection for industrial control and safety systems, using a plunger actuator for direct contact sensing in vertical mounting arrangements. It is built with a robust die-cast aluminium enclosure and supports field wiring via a 1/2 in NPT conduit entry, making it suitable for integration into automated machinery and electrical panels where a compact, rugged switch is required.

Features and Benefits:

• SPDT snap-action contacts for fast, positive switching action
• Rated switching current 20A for high-load circuit control
• Accepts up to 480V AC or 250V DC for versatile supply compatibility
• Operating force 11.2 N enables repeatable actuation sensitivity
• Works across -32°C to 71°C for extended ambient range
• CSA, UL and RoHS approvals for recognised industrial standards

Applications

• Suitable for limit detection on automated conveyors and presses
• Ideal for end-of-travel sensing on actuated valves and cylinders
• Used with motor starters for overtravel protection in machinery
• Can be used for position feedback in packaging equipment

How should it be oriented during installation for correct actuation?

It is designed for vertical mounting to ensure the plunger operates within intended travel and maintains consistent actuation force.

What environmental protection does the enclosure provide on-site?

The body is die-cast aluminium offering mechanical robustness and an IP-rated design suitable for industrial atmospheres where ingress resistance is required.

Which wiring method is compatible with existing conduit runs?

The switch accommodates a 1/2 in NPT conduit entry allowing straightforward connection to standard conduit systems and gland fittings.

How does the contact arrangement affect control logic integration?

The single-pole double-throw contact configuration provides both normally open and normally closed outputs so it can be wired for either make-or-break signalling in control circuits.

Approvals

UL, CSA.