Telemecanique Sensors XCSM Series Plunger Limit Switch, 2 NO/2 NC, IP68, IP67, IP66, Metal Housing, 240V ac, 1.5A

모든 Limit Switches 열람하기

Subtotal (1 unit)*

₩165,600.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 5 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩165,600.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
766-1728
제조사 부품 번호:
XCSM4110L1
제조업체:
Telemecanique Sensors
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Telemecanique Sensors

Product Type

Limit Switch

Actuator Type

Plunger

IP Rating

IP68, IP67, IP66

Contact Configuration

2 NO/2 NC

Housing Material

Metal

Contact Type

Snap Action

Terminal Type

Cable

Switching Current

1.5A

Series

XCSM

Minimum Operating Temperature

-25°C

Switching AC Voltage

240V ac

Switching DC Voltage

250V dc

Maximum Operating Temperature

70°C

Length

60mm

Standards/Approvals

CE, CSA, EN, IEC, RoHS, UL

Width

30mm

Depth

16mm

Hazardous Area Certification

No

Operating Force

42.5N

Mechanical Life

10000000Cycles

COO (Country of Origin):
ID

Telemecanique Sensors XCSM Series Limit Switch, IP68, 1.5A Switching Current - XCSM4110L1


This limit switch is a plunger-actuated device designed to provide definitive position detection in industrial environments where robust protection and longevity are required. It operates across a wide ambient temperature range and uses a metal enclosure to withstand demanding conditions while offering snap-action contacts for precise switching behaviour.

Features and Benefits:


• Snap-action contacts deliver quick, repeatable state changes
• 2NO/2NC configuration allows versatile control logic arrangements
• Rated for 250Vdc switching to support DC control circuits
• 240Vac switching capability for mains AC applications
• Mechanical life of 10,000,000 cycles reduces maintenance frequency
• Cable Terminal simplifies wiring in fixed installations

Applications


• Suitable for conveyor end-of-travel signalling in factories
• Ideal for actuator position detection in automation systems
• Used with hydraulic or pneumatic cylinders for cycle monitoring
• Can be used for door and guard position sensing in machinery
• Suitable for outdoor equipment requiring waterproof performance

What ingress protection levels are available for this device?


It is offered with IP66, IP67 and IP68 ratings to suit varying degrees of dust and water exposure.

What range of ambient temperatures can it tolerate during operation?


It operates from -25°C up to 70°C to accommodate cold starts and warm industrial environments.

What is the switching current capability and how does it affect load selection?


The contacts are rated for 1.5A switching current, which determines compatible relay or load direct-drive choices.

What materials and approvals support its use in regulated installations?


The enclosure is metal and the product holds CE, CSA, EN, IEC, RoHS and UL approvals.

How much force is required to actuate the plunger during installation alignment?


The operating force is specified as 42.5 N, informing actuator alignment and mounting choices.

Note

With the appropriate monitoring system and correctly wired these switches can reach safety category 4 conforming to EN/ISO 13849-1, PL e conforming to EN/ISO 13849-1, SIL 3 conforming to EN/IEC 61508.

Approvals

UL, CSA.

Standards

CSA C22-2 No 14, EN 1088, EN/IEC 60204-1, EN/IEC 60947-5-1, UL 508.

관련된 링크들