Telemecanique Sensors XCSM Series Roller Plunger Safety Limit Switch, 2 NO/2 NC, IP66, IP67, IP68, Zamak Housing, 400V

RS 제품 번호:: 133-0060
제조사 부품 번호:: XCSM4102L2
제조업체:: Telemecanique Sensors

Telemecanique Sensors XCSM Series Roller Plunger Safety Limit Switch, 2 NO/2 NC, IP66, IP67, IP68, Zamak Housing, 400V

Subtotal (1 unit)*

₩335,220.00

10 개 단위 배송 준비 완료
추가로 2026년 10월 08일 부터 35 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩335,220.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 133-0060
제조사 부품 번호:: XCSM4102L2
제조업체:: Telemecanique Sensors

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Telemecanique Sensors
	Product Type	Safety Limit Switch
	Actuator Type	Roller Plunger
	IP Rating	IP66, IP67, IP68
	Contact Configuration	2 NO/2 NC
	Housing Material	Zamak
	Contact Type	Snap Action
	Switching Current	6A
	Terminal Type	Pre-Cabled
	Series	XCSM
	Minimum Operating Temperature	-25°C
	Switching DC Voltage	300V dc
	Switching AC Voltage	400V ac
	Maximum Operating Temperature	70°C
	Width	30mm
	Standards/Approvals	RoHS
	Length	70mm
	Depth	16mm
	Hazardous Area Certification	No
	Operating Force	35N
	Conduit Entry	M20
	Mounting Orientation	Horizontal
	Mechanical Life	10000000Cycles

	모두 선택
	브랜드 Telemecanique Sensors
	Product Type Safety Limit Switch
	Actuator Type Roller Plunger
	IP Rating IP66, IP67, IP68
	Contact Configuration 2 NO/2 NC
	Housing Material Zamak
	Contact Type Snap Action
	Switching Current 6A
	Terminal Type Pre-Cabled
	Series XCSM
	Minimum Operating Temperature -25°C
	Switching DC Voltage 300V dc
	Switching AC Voltage 400V ac
	Maximum Operating Temperature 70°C
	Width 30mm
	Standards/Approvals RoHS
	Length 70mm
	Depth 16mm
	Hazardous Area Certification No
	Operating Force 35N
	Conduit Entry M20
	Mounting Orientation Horizontal
	Mechanical Life 10000000Cycles

Telemecanique Sensors XCSM Series Safety Limit Switch, IP66/IP67/IP68, 35N Operating Force - XCSM4102L2

This safety limit switch is a compact, industrial-grade device designed to detect position and actuate control circuits in automated systems. It is intended for horisontal mounting and provides a robust electromechanical switching solution for machinery where precise end-of-travel detection and safety interlocking are required. The unit incorporates a roller plunger actuator and is supplied with factory-fitted cable terminations for straightforward installation.

Features and Benefits:

• Roller plunger actuator reduces mechanical wear for consistent operation
• Snap-action contacts deliver fast switching with clear state change
• 2NO/2NC contact arrangement supports both signalling and control circuits
• Rated switching up to 6A for 400V AC and 300V DC handling
• Sealed enclosure offers protection against water ingress for harsh conditions
• Construction endures 10,000,000 cycles for prolonged service life

Applications

• Suitable for conveyor end-of-travel detection in manufacturing lines
• Ideal for guarding interlocks on automated packaging machines
• Used with robotic pick-and-place systems for position feedback
• Can be used for lift door-edge sensing and safety circuits
• Suitable for valve position monitoring in process installations

How is the unit connected within a control panel?

It is supplied pre-cabled for direct wiring into control systems, removing the need for additional Terminal blocks.

What environmental temperatures can the switch withstand during operation?

The device operates across a range from -25°C up to +70°C without degradation of switching performance.

What conduit size is provided for cable entry and mechanical routing?

A single M20 conduit entry is incorporated to accommodate standard gland fittings and cable protection.

What materials contribute to the enclosure’s mechanical resilience?

The housing is manufactured from zamak, providing impact resistance and dimensional stability under mechanical load.

Note

With the appropriate monitoring system and correctly wired these switches can reach safety category 4 conforming to EN/ISO 13849-1, PL e conforming to EN/ISO 13849-1, SIL 3 conforming to EN/IEC 61508.

Approvals

UL, CSA.

Standards

CSA C22-2 No 14, EN 1088, EN/IEC 60204-1, EN/IEC 60947-5-1, UL 508.