Telemecanique Sensors XCS Series Plunger Limit Switch, 1 NO/2 NC, IP67, IP66, Plastic Housing, 240V ac, 1.5A

RS 제품 번호:: 766-1624
제조사 부품 번호:: XCSD3910P20
제조업체:: Telemecanique Sensors

Telemecanique Sensors XCS Series Plunger Limit Switch, 1 NO/2 NC, IP67, IP66, Plastic Housing, 240V ac, 1.5A

Subtotal (1 unit)*

₩104,260.00

5 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩104,260.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 766-1624
제조사 부품 번호:: XCSD3910P20
제조업체:: Telemecanique Sensors

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Telemecanique Sensors
	Actuator Type	Plunger
	Product Type	Limit Switch
	IP Rating	IP67, IP66
	Contact Configuration	1 NO/2 NC
	Housing Material	Plastic
	Contact Type	Snap Action
	Switching Current	1.5A
	Terminal Type	M20
	Series	XCS
	Minimum Operating Temperature	-25°C
	Switching DC Voltage	250V dc
	Switching AC Voltage	240V ac
	Maximum Operating Temperature	70°C
	Depth	35mm
	Width	34mm
	Standards/Approvals	IEC, EN, CSA, CE, UL, RoHS
	Length	89mm
	Hazardous Area Certification	No
	Conduit Entry	M20 x 1.5
	Operating Force	15N
	Mechanical Life	15000000Cycles

	모두 선택
	브랜드 Telemecanique Sensors
	Actuator Type Plunger
	Product Type Limit Switch
	IP Rating IP67, IP66
	Contact Configuration 1 NO/2 NC
	Housing Material Plastic
	Contact Type Snap Action
	Switching Current 1.5A
	Terminal Type M20
	Series XCS
	Minimum Operating Temperature -25°C
	Switching DC Voltage 250V dc
	Switching AC Voltage 240V ac
	Maximum Operating Temperature 70°C
	Depth 35mm
	Width 34mm
	Standards/Approvals IEC, EN, CSA, CE, UL, RoHS
	Length 89mm
	Hazardous Area Certification No
	Conduit Entry M20 x 1.5
	Operating Force 15N
	Mechanical Life 15000000Cycles

Telemecanique Sensors XCSD Series Limit Switch, IP67, 15N Operating Force - XCSD3910P20

This limit switch is a Compact mechanical device designed to detect position or end-of-travel in automated systems. It employs a plunger actuator housed in metal and is intended for use where a robust, sealed switching element is required across a wide ambient temperature range.

Features and Benefits:

• Plunger actuator delivers positive mechanical contact for accurate position detection
• Snap-action contacts provide quick transition to reduce contact bounce
• Contact arrangement 1 NO/2 NC allows versatile control logic configurations
• Switching capability 250 V dc and 240 V ac supports mixed-supply environments
• Mechanical life 15 000 000 cycles ensures extended service between replacements
• Ingress protection IP67 and IP66 offers protection against dust and water immersion

Applications

• Suitable for conveyor end-of-travel detection in manufacturing lines
• Ideal for limit sensing on automated Gates and doors
• Used with hydraulic presses for position confirmation
• Can be used for safety interlocks in assembly automation
• Suitable for material handling equipment in wet conditions

What Terminal and conduit provisions are provided for wiring?

The device uses a Terminal type with M20 conduit entry and thread M20x1.5 to accept standard gland fittings.

What electrical current can each contact handle during switching?

Each contact is rated for switching currents up to 1.5 A for typical control-circuit loads.

What operating force is required to actuate the plunger?

The plunger requires an operating force of 15 N to change state.

What ambient temperatures can the device operate within?

It is specified for operation from −25 °C up to 70 °C.

Which standards approvals are associated with the product?

Approvals include IEC, EN, CSA, CE, UL and RoHS.

Note

With the appropriate monitoring system and correctly wired these switches can reach safety category 4 conforming to EN/ISO 13849-1, PL e conforming to EN/ISO 13849-1, SIL 3 conforming to EN/IEC 61508.

Approvals

UL, CSA.

Standards

CSA C22-2 No 14, EN 1088/ISO 14119, EN/IEC 60204-1, EN/IEC 60947-5-1, UL 508.